- Product Details
- {{item.text}}
Quick Details
-
Type:
-
FTDI cable, TTL cable, USB to uart cable
-
Use:
-
Raspberry Pi, Arduino
-
Brand Name:
-
ftdi usb to uart ttl serial cable
-
Model Number:
-
ftdi usb to uart ttl serial cable
-
Place of Origin:
-
Hubei, China
-
Function:
-
data transmission
-
Product name:
-
FTDI USB to uart ttl serial cable
-
Cable type:
-
USB to ttl serial cable / USB to uart cable/ FTDI cable
-
Chip:
-
FTDI FT232RL
-
TTL level:
-
3.3V/5V
-
Interface:
-
USB2.0 A male / 6P header dupont terminal
-
Signal:
-
GND CTS VCC TXD RXD RTS
-
Cable length:
-
1.8m (1m 3m 5m 10m)
-
Wire gauge:
-
24AWG
-
Application:
-
for Raspberry Pi / robot
-
OEM ODM:
-
accept
Quick Details
-
USB Type:
-
USB2.0 A male / 6P header
-
Material:
-
PVC, Pure Copper
-
Connector:
-
USB 2.0 A male, 6P header dupont terminal
-
Type:
-
FTDI cable, TTL cable, USB to uart cable
-
Use:
-
Raspberry Pi, Arduino
-
Brand Name:
-
ftdi usb to uart ttl serial cable
-
Model Number:
-
ftdi usb to uart ttl serial cable
-
Place of Origin:
-
Hubei, China
-
Function:
-
data transmission
-
Product name:
-
FTDI USB to uart ttl serial cable
-
Cable type:
-
USB to ttl serial cable / USB to uart cable/ FTDI cable
-
Chip:
-
FTDI FT232RL
-
TTL level:
-
3.3V/5V
-
Interface:
-
USB2.0 A male / 6P header dupont terminal
-
Signal:
-
GND CTS VCC TXD RXD RTS
-
Cable length:
-
1.8m (1m 3m 5m 10m)
-
Wire gauge:
-
24AWG
-
Application:
-
for Raspberry Pi / robot
-
OEM ODM:
-
accept
FTDI Chip FT232 USB to TTL 3.3V 5V Uart RTS CTS TXD RXD Serial Converter Cable for Arduino Raspberry Pi
| Product name | FTDI USB to uart ttl serial cable |
| Cable type | FTDI cable / USB to uart cable / TTL serial cable |
| Chipset | FTDI FT232RL (CP2102 / CH340/PL2303 more options ) |
| Interface | USB 2.0 A male / 6P header dupont terminal |
| Output signal | GND/RTS/CTS/RXD/TXD/VCC |
| TTL level | 3.3V/5V |
| Wire gauge | 24AWG( #18~#30AWG) |
| Cable length | 1.8m (0.2m/1m/2m/3m/5m/10m) |
| Application | for Raspberry Pi / Robot / program |
| OEM ODM | accept |
More Decription:
- 6 ft FT232 USB to TTL serial adapter (with 6 pin 0.1” pitch female socket header) connects devices with 5V logic level UART signals interface to a laptop via USB port
- A genuine FT232RL chip module is housed in USB 2.0 type A male terminal for wider compatibility and supports reliable data transfer rates
- 6 feet FTDI USB to TTL serial cable (6 way outputs, Single-In-Line ) provides access to Tx, Rx, RTS#, CTS#, VCC (5v) and GND
- FTDI chipset on the PCB board has configurable internal EEPROM and UART signals can be individually inverted by configuring the EEPROM
- 6 pin header 5V TTL to USB converter cord is compatible with Windows 11,10, 8, 8.1, 7 (32, 64-bit), 2008/XP/Vista/CE, Mac OS, Linux 2.4 and greater; ideal USB 2.0 debug cord for Vendor ID re-write, router, GPS, set top box, transmitter, flash firmware on hard drive, etc.
Features:
- The I/O pins of the FTDI wire are configured to operate at 5.0V logic level - Entire USB protocol handled by the electronics in the cable;
- UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity;
- Data transfer rates from 300 to 3M baud rate at TTL levels;
- Fully assisted hardware (RTS#/CTS#) or X-On / X-Off software handshaking;
- Internal EEPROM with users writable area; - Supply voltage comes from USB bus, no external supply required;
- UHCI / OHCI / EHCI host controller compatible
