Organic fertilizante de silicona esparcidor SPEEDO CERES para exportacion del fabricante indio

Choose Your Language

Agricultural Silicone Spreading and Penetrating Agent (Silicone Surfactant)

Sil-Spread acts as:

• Super Spreader
• Sticker
• Penetrator
• Activator
• Plant Growth Promoter
• Soil Conditioner

Mechanism of Sil-Spread :

• · The chemical structure of silicon surfactant makes it have super spreading property compared with regular adjuvant.

  · The content of trisiloxane is the key which guarantees the spreading ability.

  · Sil-Spread has trisiloxane content of 80%-85%, concentration 100%, it is a super-spreading surfactant.

Product Description :

·       Agricultural silicon synergistic agent SIL-SPREAD (@0.1wt%) gives an aqueous surface tension <21.5mN/m

·       After the mixture with the agrochemicals solution at the certain proportion, the contact angel of spray solutions on leaf surfaces is reduced, leading to an increase in spray coverage.

·       Additionally, Sil-Spread promotes rapid uptake of agrochemicals into plants via stomatal infiltration. Spray solutions taken into plants in this way become rainfast, thereby improving application reliability.

Crops :

Sil-Spread can be used on all kinds of Field Crops (Cotton, paddy, wheat, etc), Fruit crops (Banana, mango, grapes, pomegranate, etc), Vegetable crops (tomato, chilly, brinjal, etc) and Plantation crops (Tea, coffee, horticulture and floriculture plants, etc)

Product Advantages :

· Superior Wetting

· Superior dispersion

· No odour

· Readily biodegradable

· Nonionic

· Silicon acts as Plant Growth Promoter

· Reduces use of fertilizers and pesticides by 30-40%.

· Effect is 4 times better than regular sticker and lesser amount is required

· The pH of the product is very stable and because of its ion exchange capacity, it is a very good soil conditioner

· Promotes rapid uptake of agro-chemicals (Rainfastness).

· Improves Spray coverage

· Has good effect on the pests that hide in sheltered places

· Saves Cost

· Reduces environmental pollution caused by agro-chemicals

· Helps reduce excess water in root zone by allowing deeper penetration. Reduces evaporation

Specifications :

· Appearance: Colourless to light amber liquid

· Surface Tension(0.1%): < 20.8±0.5mN/m

· Density: 1.007g/cm3

· Viscosity(25°C): 15-25 mPa.s

· Reflex index: 1.44~1.45

· Cloud Point: <10°C

Sil Spread Liquid:

Solubility and Compatibility :

· Soluble in water

· Soluble in chlorinated solvents and most polar organic solvents

· Chemically stable in the presence of dilute acids, bases and salts

· Compatible with anionic, cationic, and other nonionic surfactants

How to use :

As A Tank Mix Adjuvant Sil-Spread is the most effective as a tank-side adjuvant when spray mixtures are (i) within a PH range of 6-8,and (ii) prepare the spray mixture for immediately use or within 24h preparation.

Sil-Spread achieves full performance at very low use-levels, often 0.01 to 0.05% will be sufficient . Once the full performance of Sil-Spread has been reached, a further increase in the silicone surfactant concentration will show no effect. We recommend testing first at a concentration of 1% and afterwards lowering the SIL-SPREAD concentration to the point at that still full performance is achieved.

In general, the amount is as follows:

· Plant promote regulator: 0.025%-0.05%

· Herbicide: 0.025%-0.15%

· Pesticide: 0.025%-0.1%

· Bactericide: 0.015%-0.05%

· Fertilizer and trace element: 0.015%-0.1%

When using, first dissolve the agrochemicals, add Sil-Spread after the uniform mixture of 80% water, then add water to 100% and mix them uniformly. It is advised that when using Agricultural Silicone Spreading and Penetrating Agent, the water amount reduced to 1/2 of the normal (suggested) or 2/3, average pesticide usage reduced to 70-80% of the normal. Using the small aperture nozzle will quicken the spray speed.