- Product Details
- {{item.text}}
Quick Details
-
EINECS No.:
-
210-898-8
-
Place of Origin:
-
Hunan, China
-
Brand Name:
-
MAGPOW
-
Model Number:
-
MPD108
-
Type:
-
synthetic rubber
-
Appearance:
-
Light yellow thick liquid
-
Solid Content(%):
-
45+-2
-
Viscosity:
-
1500-2500(25 centigrade,mPa.S)
-
Peel Strengthen:
-
more than 70(25 centigrad*48h,canvas-canvas N\2.5cm)
-
certification:
-
ISO, Reach, etc
-
Shelf life:
-
12months
-
Stock:
-
Full
-
Custom-tailor:
-
can accpet customer's brand and design
-
Item:
-
neoprene contact adhesive for sofa
Quick Details
-
CAS No.:
-
24937-78-8
-
Other Names:
-
Styrene-butadiene rubber
-
MF:
-
C3H8N2O
-
EINECS No.:
-
210-898-8
-
Place of Origin:
-
Hunan, China
-
Brand Name:
-
MAGPOW
-
Model Number:
-
MPD108
-
Type:
-
synthetic rubber
-
Appearance:
-
Light yellow thick liquid
-
Solid Content(%):
-
45+-2
-
Viscosity:
-
1500-2500(25 centigrade,mPa.S)
-
Peel Strengthen:
-
more than 70(25 centigrad*48h,canvas-canvas N\2.5cm)
-
certification:
-
ISO, Reach, etc
-
Shelf life:
-
12months
-
Stock:
-
Full
-
Custom-tailor:
-
can accpet customer's brand and design
-
Item:
-
neoprene contact adhesive for sofa
Top Bonding Strength Quality Environmental Friendly Contact Cement Adhesive Solvents Based Glue For Shoes and Leather
Specifiction: 750mL/tin,12tins/ctn
Meas: 65.8*22.8*14cm
Feature:
The product is the single component of volatile dry type adhesive with perfect performance of small viscosity, water and oil resistant, durable, fast dry.
Main Component:
Neoprene
Scope Of Application:
This product is mainly used in the daily repair. Such as repair of leather, rubber, wood, fabric, paper etc.
Using Method:
1.Coarse the smooth material with the sandpaper or the ceramic file, clean with the gasoline or the acetone.
2.Spread evenly on the dry and clean surface, cool a moment, spread again when not viscosity For multi holes material must spread 2-3 times.
3.When touches the glue with the finger, when sticks not wiredrawing, the alignment fitting and exerts pressure, be sure not dislocation migration, after the normal temperature solidifies for 48 hours, can be put into operation.
Warning:
1. The operating environment should be ventilative and should keep away of the fire. Better to use at room temperature 15℃~28℃ .
2. When use, increases 5~15% Lek sodium, may reduce the solidification time, enhances the cementation intensity.
3. Seal closely after use in order to avoid solvent volatility, if the viscosity too is big, add proper amount coca the xylene to dilute.
4. Avoid the skin and the eye contact, if touches the skin, clean with soap water, if touches the eye carelessly, uses the massive clear water flushing immediately, go to hospital for serious situation.
5. Please make a trial to avoid usage mistakes before application. Our products have been widely used on the market, the quality is reliable. But we do not guarantee that difference will cause under difference using condition, material or technique. So user should use after trail use.
Storage And Packing:
1.Stock the products in the air-tight seal at the temperature of 10-35℃. The shelf life is one year. It is available to use based on passing of the test if being beyond the shelf life.
2.Preserve and transport as flammable products.
3.Packing specification: 750ml/tin, in iron tin: 15kg/barreal, in iron barrel.
| Name Of Product | Appearance | Viscosity(25℃,mPa.S) | Solid Content(%) | Peel Strength(25℃x48h,canvas-canvas N/2.5cm) |
| Universal Decoration Adhesive(327) | Light yellow thick liquid | 1500-2500 | ≥45 | ≥70 |
This product is mainly used in the daily repair. Such as repair of leather,rubber,wood,fabric,paper etc.
Applied to interior decoration, automotive interiors decoration, furniture and other industries. Also Adhesive to wood, MDF, fire board,aluminum composite panel, leather, rubber, fabric,paper and other materials.
1.Adhesion surface should be oil decontamination and smooth,clean,dry.
2.Use scraper or brush with sticky material in the glue evenly on both sides if a large area bonding, it is proposed that coating the two adhesive surface at the same time.
3.Let it dry at room temperature 5-15 minutes, when the glue is not so sticky then drawing a one-time at the bonding, extrusion from the inside out to remove air bubbles,percussion compaction,it reach use strength after 24 hours.
1.Ventilation conditions in the use environment,and fireworks is strictly prohibited.
2.When opening the cover,use hand to hold down the voer in order to avoid glue's expansion because of the thermal emission.
3.cover tightly after use to prevent the volatile liquid become sticky.
4.Suitable for construction of the temperature above 15℃,no higher than 38℃,relative humidity less than 80%.
5.To avoid skin,eye contact, not entrance to mouth and prevent children's contact.
6.Please pre-tested before use in order to avoid errors.
1. Stock the fireproof contact cement in the air-tight seal at the temperature of 10-35℃. The shelf life is one year. It is available to use based on passing of the test if being beyond the shelf life.
2. Preserve and transport as flammable products.
Carefully clean the surfaces be bonded, smear the glue on both surfaces, then wait for a while, about 10-18mins according to the room temperature joint the parts together and press them.
HUNAN MAGPOW ADHESIVE GROUP CO., LTD
Was founded in 1989, Leaders at all levels of care and guidance, in the community friends and the majority of customers with the help and support, has gone through more than 20 years of arduous pioneering and steady development process. Companies from the original workshop-style processing plant to national "Torch Plan" implementation of enterprises, national standards of enterprises, the state's key high-tech enterprises. Group assets worth 150 million.
As the country's largest private enterprise adhesive technology research institute. The Research Institute covers an area of 3600 square meters. A total of five layers, Divided into 28 advanced equipment, full-featured professional laboratory. The company invested more than 1100 million one-time, And The introduction of more than 20 sets of world-class test and testing equipment from Germany and Taiwan. The Research Institute has made a number of international advanced level of scientific research and national invention patents. At present, the company is actively reporting to create a national technology research institute-Global Adhesive Laboratory.
Reply within 24 Hours
Professional consultation service is available within 24 hours after receiving your feedback regarding the iterms that you bought. Global Insurance Service
Global insurance service
guarantees the safety of iterms when installation and application.
Compensation Policy
Any quality problem caused by our company side with enough evidence, we promise you that if could bere-produced for free.
Contact us, you will get more than what you see!
