Style 1. Tracking System Reduction Gear Series
Reducer series requires manual adjustment of the entire system.Available in single row & double row types.
Single row(CK-S-1)
a. Drive device: 24V rotary reduction gear drive; b. Easier to install, Square or regular octagonal steel pipe has better bending
and torsion resistance.
c. Install dampers on both sides to reduce wind resonance and eliminate distortion.
a. Drive device: 24V rotary reduction gear drive; b. Easier to install, Square or regular octagonal steel pipe has better bending
and torsion resistance.
c. Install dampers on both sides to reduce wind resonance and eliminate distortion.
Double-row(CK-D-1)
1. Driving device: 24V rotary reduction gear double-point drive; 2. Install a reduction gear at both ends to reduce the torsional
deformation of the spindle and make the structure more stable
3. When the wind load acts, the wind pressure resonance is reduced, and the wind resistance is better.
4. Reduce the motor load, the power is safer and more stable
1. Driving device: 24V rotary reduction gear double-point drive; 2. Install a reduction gear at both ends to reduce the torsional
deformation of the spindle and make the structure more stable
3. When the wind load acts, the wind pressure resonance is reduced, and the wind resistance is better.
4. Reduce the motor load, the power is safer and more stable
