GF Series 1 Micron Pleated Glass Fiber Membrane Cartridge Filter For Aqueous Solution Ink Filtration

GF Series 1 Micron Pleated Glass Fiber Membrane Cartridge Filter For Aqueous Solution Ink Filtration

These filters are made of super fine glass fiber media, which has the inherently adsorptive characteristic to enhance the filter retention capability, good choice for prefiltration/clarification and protection of fine filters in various applications.

1. Combination of highly adsorptive and mechanical retention for effective clarification;

2. High dirt holding capacity and excellent flow performance;

3. Suitable for the removal of colloids, lipids, protein aggregates and particles;

4. Glass Fiber or PP prefilter layer is available for higher dirt holding capacity and longer service life;

5. Good oil resistance, wide chemical compatibility;

6. Economical and ideal choice for protection of final membrane filters;

Materials Of Construction		Filter Media:		Glass Microfiber(GF)
		Support Layers:		Polypropylene
		Micron Rating:		0.2, 0.45, 0.65, 1.0, 3.0, 5.0, 10 um
		Inner Core:		Polypropylene
		Outer Cage, End caps:		Polypropylene
		Seal Method:		Thermal Bonded, No Adhesives
		O-rings/gaskets:		Silicone, Nitrile, EPDM, Viton, PTFE
		Filtration Efficiency		≥90%
Cartridge Dimensions		Outer Diameter		69 mm
		Inner Diameter		33 mm
		Length(based on DOE end caps)		10, 20, 30, 40 Inch
		Filtration Area(m2)		0.4 m 2 per 10''
Operating Conditions		Normal Operating Temperature:		Up to 60℃ (140℉)
		Max.Operating Temperature:		85℃ (185℉) at P≤1.0 bar (14.5 psi)
		Max. Differential Pressure
		Normal Flow Direction:		4.2 bar (60.9 psi) at 25℃ (77℉)
		Reverse Flow Direction:		2.1 bar (30.5 psi) at  25℃ (77℉).
		PH Value Compatibility:		1-13
		Sterilization:		In-line steam sterilization is Not recommended, Flush with hot water at 82℃(180℉) for 30 minutes
Typical water flow rate @ 25 ℃ (10")