- Product Details
- {{item.text}}
Quick Details
-
Application:
-
wood
-
Substrate:
-
Wood Surface
-
Certificate:
-
ISO/TS16949 (SGS) ISO14001
-
Material:
-
polyurethane
-
Shelf Life:
-
12 Months
-
Appearance:
-
Transparent Liquid
-
Gloss:
-
Matt\satin\Glossy\High Glossy
-
Feature:
-
High Gloss
-
Name:
-
PU lacquer
Quick Details
-
CAS No.:
-
79-10-7
-
Place of Origin:
-
China
-
Color:
-
Color Card
-
Application:
-
wood
-
Substrate:
-
Wood Surface
-
Certificate:
-
ISO/TS16949 (SGS) ISO14001
-
Material:
-
polyurethane
-
Shelf Life:
-
12 Months
-
Appearance:
-
Transparent Liquid
-
Gloss:
-
Matt\satin\Glossy\High Glossy
-
Feature:
-
High Gloss
-
Name:
-
PU lacquer
Maydos Wood furniture paint Clear sanding sealer
Description
Maydos Extra Clear Wood Varnish is a high quality 2-component polyurethane finish. It isyour best choice for decoration and protection of various wooden surfaces. The high filmbuilding character of can also bring out natural wooden beauty to the full.
Technical Data:
|
Model |
All Models |
|
Theoretical Coverage |
12-14m 2 /kg/coat |
|
Drying:(25 ℃,relative humidity:75%) |
Touch dry:20 minutes; Hard dry:12 hours |
|
Application Tools |
Brush, Spray gun |
|
Storage |
Always store in Cool & Dry places and avoid ignition&heat. |
|
Packing |
5kg,9kg(set pack) or 1L,3L,4L,18L,200L |
|
Shelf Life |
12 months |
|
Cup life |
4 hrs |
MODEL:
|
MODEL |
PAINT |
Hardener |
Thinner |
Mixing Ratio Base:Hardener:Thinner |
|
M8600 |
PU Clear Wood Varnish(Glossy) |
MG706 |
MX83 |
1:1:0.8-1 |
|
M8603 |
PU Clear Wood Varnish(Matt) |
MG706 |
MX83 |
1:0.5:1 |
|
M8605 |
PU Clear Wood Varnish(Semi-Gloss) |
MG706 |
MX83 |
1:0.5:1 |
|
M8600D |
PU Clear Wood Primer |
MG706 |
MX83 |
1:0.5:1 |
Preparation and Application
|
1. Make sure all surfaces must be clean, dry and free from wax, grease, oil etc |
|
2. For bare wood, sand down in the direction of the grain until smooth with fine abrasives and paper. Start with 80# sandpaper, and then 150# and last 220#. Use clean cloth to remove dust between sanding. |
|
3. If you are using paint as a topcoat over another finish, sand the existing finish first with steel wool or synthetic steel wool. |
|
4. Apply a thin coat of paint on the wood and allow it to dry completely. After the first coat has dried, sand it lightly with fine abrasive paper to remove any raised grain. |
|
5. Brush or spray another coat of paint and allow it to dry. |
|
6. Continue to apply coats of paint until you achieve the surface build-up you desire. |
|
7. Check the finish to see whether there are small nicks or imperfections. Rub out any rough spots with steel wool or synthetic steel wool. Wipe with a clean tack cloth to remove dust. For extra protection, polish the surface with paste wax or furniture polish |
Safety Tips:
1. Always apply the paints in a well-ventilated place.
2. Wear eye protection and rubber gloves to prevent exposure to paints.
3. This product is highly flammable liquid. May cause sensitization by inhalation and skincontact.
4. This product is by professional use only
Wood Board Sample
