Portable welding gas extractor/fume extraction system/mobile dust collector

Product Description

Portable welding gas extractor/fume extraction system/mobile dust collector

Applications :Qingdao Loobo welding fume extractor are mainly used to extract/collect the fume and dust in the metal fabrication process, like the welding, polishing, grinding, metal cutting, etc.

With active carbon filter layer, some odor gas can be absorbed before released the clean air. Portable type with small size, you can move them freely in your workshop to the working posation, economic and high efficiency.

Use for purification of the smoke and dust during the welding, polishing, cutting, grinding process and the recycling of rare metals and precious material, can purify large amounts of suspended small metallic particles in the air.

* Operating Principle:

It is equipped with three layer filter system

1, under the help of the fan device, the welding fume is sucked into inlet through sucking hood. There is the flame arrester in the inlet, so the spark can be blocked here, the left fume and dust is sucked into gravity separator, and then the bigger particles firstly descend into dust bag.
2, the smaller particles are arrested in the surface of core filter. The cleaner gas then flow into clean room after being purified by core filters.
3, in clean room, the clean gas is then further purified by active carbon. At last, the gas meets the required standards and enters into air or other required room.

**Facility Characteristics

1)      It is equipped with ABB turbo fan and motor imported from Germany and America, with overload prevention circle to avoid motor damage. It is of steady performance.

2)      It is equipped with built-in centralized PLC controlling system. The operation panel is clear and simple, very easy to operate.

3)      Pulsing back-flushing automatic dust-removal system: The filter core is the automatic rotating and back-flushing type, which keeps the filter core surface clean when working, to insure the stable blowing rate; the air compressor parts are connected with high pressure rubber pipe with high pressure air-inflow in the bottom, which insure the facility always in good working condition.

4) The filter core is imported from America with long useful life. It can arrest the 0.3μm particles. The filtering effect is good for all kinds of particles including the wet particles.

5) It is equipped with the all-directions sucking arm of 360 degree rotating. It can suck the fume exactly from the source which make best of the fume collection efficiency, and insure the workers’ health in the largest extent.

6) It is equipped with three layer filter system to avoid the damage effect of flame and large slag particles, which extend the useful life, safer and more reliable.

7) Clean air uniform guidance and dispersed from the grille outlet, to keep the noise minimum.

8) It is attached with all-direction caster wheels, which makes the facility movable freely and easy to position.

9) Photoelectric controlled on/off, energy saving and high efficiency. The hood has the lighting device which is upon customer’s choice.

10) The parts working condition are all stable and have long useful life, meantime easy to be replaced.

**LB-JZX Series Double cartridge filter Welding Fume Purifier Parameters Table

Model	Airflow (M 3 /h)	Voltage(V)		Power(Kw)	SizeLxWxH (mm)	Compressed air(mpa)	NoiseDb(A)
LB-JZX2400	2400	380V/50/3PH		2.2	900*800*1400	0.5-0.6	≤75
LB-JZX3600	3600			3.0	900*800*1400		≤78
LB-JZX4800	4800			4.0	900*800*1400		≤78
LB-JZX2400S	2400			2.2	900*800*1400		≤75
LB-JZX3600S	3600			3.0	900*800*1400		≤78
LB-JZX4800S	4800		4.0		900*800*1400		≤78

LB-JZ Series Welding Fume extractor Parameters Table, Maunal cleaning type :

Model	Airflow (M 3 /h)	Voltage (V)	Power (kw)	Size L xWxH (mm)	Noise (dB)
LB-JZ 1500	1500	380	1.5	650x550x1250	≤60
LB-JZ 2400	2400	380	2.2	650x550x1250	≤68
LB-JZ 3600	3600	380	3.0	650x550x1250	≤68
LB-JZ2400S	2400	380	2.2	650x550x1250	≤69
LB-JZ3600S	3600	380	3.0	650x550x1250	≤72

LB-JZD Series Welding Fume Purifier Parameters Table, Auto cleaning type :

The " D " in models for the welding fume extractors represent Pulsing back-flushing automatic dust-removal system. " S " respresents the welding fume extractor has the double  arms for two working stations.

The JZ(D) is basically same to the JZ. The main difference is when you connect air compressor to back-flush for cleaning cartridge, the back-flushing of JZ(D) can be auto-controlled by pulse valve; while the back-flushing of JZ is manual type. Compare with JZ series, JZ(D) is suitable for the heavy smoke workshop.

Model	Airflow (M 3 /h)	Voltage (V)	Power (kw)	Size L xWxH (mm)	Noise (dB)
LB-JZ 1500(D)	1500	380	1.5	650x670x1250	≤72
LB-JZ 2400(D)	2400	380	2.2	650x670x1250	≤72
LB-JZ 3600(D)	3600	380	3.0	650x670x1250	≤75
LB-JZ2400S(D)	2400	380	2.2	650x670x1250	≤75
LB-JZ3600S(D)	3600	380	3.0	650x670x1250	≤75

Custom design and production is available .

Custom design and production is available.

Custom design and production is available.

Similar products:

JW Active Carbon fume extractor for welding

JK Cartridge type welding fume extractor

LB-JX Electrostatic welding fume extractor

LB-JC Smart welding  smoke purifier

LB-QX Solder and Laser Fume Extractor

Qingdao Loobo Environmental Protection Technology Co., Ltd

No.127, Liaoning Road, Qingdao China. Tel: +86 15064847869 Fax: +86-532-8068 7573