- Product Details
- {{item.text}}
Quick Details
-
EINECS No.:
-
/
-
Place of Origin:
-
Guangdong, China
-
Brand Name:
-
Hanast
-
Model Number:
-
HN-701C-1
-
Type:
-
One-Component RTV 701 Series
-
Product name:
-
Electronic Adhesive Sealant Transparent Adhesive
-
Color:
-
Translucent
-
Keywords:
-
RTV Silicone Rubber Glue
-
Feature:
-
Seal,bonding,waterproof
-
Packing:
-
100ml aluminum tube, 310ml, 2600ml plastic tube
-
MOQ:
-
1-2KG
-
Component:
-
One Compoent
-
Appearance:
-
Creamy
-
Material:
-
Silicone
-
Hardness:
-
10-30 Shore
Quick Details
-
CAS No.:
-
67763-03-5
-
Other Names:
-
Silicone Selant
-
MF:
-
/
-
EINECS No.:
-
/
-
Place of Origin:
-
Guangdong, China
-
Brand Name:
-
Hanast
-
Model Number:
-
HN-701C-1
-
Type:
-
One-Component RTV 701 Series
-
Product name:
-
Electronic Adhesive Sealant Transparent Adhesive
-
Color:
-
Translucent
-
Keywords:
-
RTV Silicone Rubber Glue
-
Feature:
-
Seal,bonding,waterproof
-
Packing:
-
100ml aluminum tube, 310ml, 2600ml plastic tube
-
MOQ:
-
1-2KG
-
Component:
-
One Compoent
-
Appearance:
-
Creamy
-
Material:
-
Silicone
-
Hardness:
-
10-30 Shore
|
Model
|
HN-701C-1
|
HN-701B-1
|
HN-701B-2
|
HN-701W-2
|
HN-701C-2
|
|
Type
|
Ketoxime RTV
|
Alcohol RTV
|
Alcohol RTV
|
Alcohol RTV
|
Alcohol RTV
|
|
Exterior
|
Translucent, creamy
|
Black,
creamy |
Black,
creamy |
White,
creamy |
Translucent, pasty
|
|
Viscosity (mPa.S)
|
——————
|
——————
|
——————
|
——————
|
——————
|
|
Specific gravity (25℃)
|
1.0~1.25
|
1.1~1.2
|
1.1~1.2
|
1.1~1.2
|
1.1~1.2
|
|
Surface dry time (min25℃)
|
10~30
|
10~30
|
5~15
|
5~15
|
5~15
|
|
Shore hardness (JISA)
|
25~45
|
25~45
|
30~40
|
20~40
|
20~40
|
|
Elongation at break (%)
|
200~350
|
200~350
|
350~400
|
350~400
|
350~400
|
|
Tensile strength (Kgf/cm2)
|
20~30
|
20~30
|
20~30
|
20~30
|
20~30
|
|
Volume resistivity (Ω.cm)
|
≥3×10
14
|
≥3×10
14
|
≥3×10
14
|
≥3×10
14
|
≥3×10
14
|
|
Breakdown voltage (kv/mm)
|
18～25
|
18～25
|
18～25
|
18～25
|
18～25
|
|
Positive dielectric loss angle (1MHZ)
|
≤4×10
-3
|
≤4×10
-3
|
≤4×10
-3
|
≤4×10
-3
|
≤4×10
-3
|
|
High and low temperature resistance (℃)
|
-50℃～250℃
|
-50℃～250℃
|
-50℃～200℃
|
-50℃～200℃
|
-50℃～200℃
|
Product Description
One-component RTV adhesive sealing silicone rubber (paste flow)
701 series
One-component RTV adhesive sealing silicone rubber (paste flow)
701 series
Product Usage:
Widely used in bonding, fixing, sealing, electrical, insulation, antifouling, waterproof, shockproof, coating, electronic
appliances and comprehensive small household appliances, instrument analysis, etc.
Features:
1. It has excellent bonding, fixing, sealing, electrical, insulation, moisture-proof, shock-proof, potting, high temperature resistance, aging resistance and other properties;
2. The hardened silicone RTV silicone rubber can exert the original electrical properties of silicone, and has good elongation (keeps its original rubber elasticity even against vibration and impact), and has weather resistance, heat resistance, and cold resistance;
3. It can be firmly bonded with most materials such as metal, glass, ceramic tile, plastic and its alloys;
4, In line with the EU ROHS directive requirements.
How to use:
According to the dosage, cut off the head of the nozzle, put on a special syringe (air gun or pistol) to extrude and use, and cure
at room temperature. After use, you need to fasten the sealing cap.
Product packaging:
100ml aluminum tube, 310ml, 2600ml plastic tube.
Application cases:
① metal, glass, ceramics, PCB board, plastic, etc. have strong adhesion;
②701B-2, 701W-2 have strong adhesion to the difficult-to-bond materials ABS, PE, nylon plastics;
Widely used in bonding, fixing, sealing, electrical, insulation, antifouling, waterproof, shockproof, coating, electronic
appliances and comprehensive small household appliances, instrument analysis, etc.
Features:
1. It has excellent bonding, fixing, sealing, electrical, insulation, moisture-proof, shock-proof, potting, high temperature resistance, aging resistance and other properties;
2. The hardened silicone RTV silicone rubber can exert the original electrical properties of silicone, and has good elongation (keeps its original rubber elasticity even against vibration and impact), and has weather resistance, heat resistance, and cold resistance;
3. It can be firmly bonded with most materials such as metal, glass, ceramic tile, plastic and its alloys;
4, In line with the EU ROHS directive requirements.
How to use:
According to the dosage, cut off the head of the nozzle, put on a special syringe (air gun or pistol) to extrude and use, and cure
at room temperature. After use, you need to fasten the sealing cap.
Product packaging:
100ml aluminum tube, 310ml, 2600ml plastic tube.
Application cases:
① metal, glass, ceramics, PCB board, plastic, etc. have strong adhesion;
②701B-2, 701W-2 have strong adhesion to the difficult-to-bond materials ABS, PE, nylon plastics;
Precautions:
1. If you need to obtain the best bonding performance, the surface of the adhesive substrate should be clean, without rust, dust and oil pollution. It can be expressed in the bonding substrate such as water -free ethanol or propane.
2. You can manually or use the dot -glue device to apply it to the substrate that needs to be bonded. The moisture in the exposure of the rubber in the air is solidified from the manifestation to the inside. Their drying and curing speed are related to the environmental temperature and humidity used. The thickness of the glue layer: the thickness of the rubber layer ≤1mm, at the temperature of 25 ± 2 ° C, the relative humidity 50 ± 5 5 Under the conditions of %, it can be put into use for 24 hours. The thicker the glue, the longer the curing time.
3. After the operation is completed, the unused glue should be tightened immediately, the seal is stored, and when it is appropriate again, if there is a little skin at the seal, it can be removed without affecting the normal use. During the storage process, a small amount of solidification or oil analysis may also occur at the mouth of the tube. After removing it,it can be used normally without affecting product performance.
4. Avoid contact with the eyes and skin. If you accidentally contact your eyes during operation, immediately rinse medical rescue with a lot of water. Keeping ventilation in the place of use is limited to industrial journey.
1. If you need to obtain the best bonding performance, the surface of the adhesive substrate should be clean, without rust, dust and oil pollution. It can be expressed in the bonding substrate such as water -free ethanol or propane.
2. You can manually or use the dot -glue device to apply it to the substrate that needs to be bonded. The moisture in the exposure of the rubber in the air is solidified from the manifestation to the inside. Their drying and curing speed are related to the environmental temperature and humidity used. The thickness of the glue layer: the thickness of the rubber layer ≤1mm, at the temperature of 25 ± 2 ° C, the relative humidity 50 ± 5 5 Under the conditions of %, it can be put into use for 24 hours. The thicker the glue, the longer the curing time.
3. After the operation is completed, the unused glue should be tightened immediately, the seal is stored, and when it is appropriate again, if there is a little skin at the seal, it can be removed without affecting the normal use. During the storage process, a small amount of solidification or oil analysis may also occur at the mouth of the tube. After removing it,it can be used normally without affecting product performance.
4. Avoid contact with the eyes and skin. If you accidentally contact your eyes during operation, immediately rinse medical rescue with a lot of water. Keeping ventilation in the place of use is limited to industrial journey.
Storage
1. Store below 30 ° C in a cool and dry place with a storage period of 6 months.
2. Products that exceed the storage period should be confirmed that there are abnormalities before they can be used.
3. Such products are non -dangerous goods and can be transported according to general chemicals.
4.It must be kept secret and be careful of leakage during transportation.
1. Store below 30 ° C in a cool and dry place with a storage period of 6 months.
2. Products that exceed the storage period should be confirmed that there are abnormalities before they can be used.
3. Such products are non -dangerous goods and can be transported according to general chemicals.
4.It must be kept secret and be careful of leakage during transportation.
Packing & Delivery
Aluminum tube + color box + K/A paper dividers + carton box
100 ml is packed in aluminum tube
Both 310 ml and 2600 ml are packaged in plastic tubes
100 ml is packed in aluminum tube
Both 310 ml and 2600 ml are packaged in plastic tubes
Hot Searches
