Taidacent 5V 12V 24V Digital Timer Switch Adjustable Time Delay Relay Module Trigger Cycle Timer Delay On Off Relay Switch

Taidacent 5V 12V 24V Digital Timer Switch Adjustable Time Delay Relay Module Trigger Cycle Timer Delay On Off Relay Switch

1. This product comes with 38 common working modes, which can realize power-on delay on/delay off timing cycles and other scenarios. For details, please refer to the function introduction of P11-P48 on the detail page, which has a wider range of applications. 2. The large time range of 0.01s-999 minutes is adjustable, and the applicability is wider. 3. The design of the module adopts diodes to prevent reverse connection, and the reverse connection does not burn. The input and output optocouplers are electrically isolated to make the product performance more stable. 4. The SMT automatic horizontal placement process is adopted in a large area to make the product consistency and higher quality Quantitative performance is better. 5. Using 0.36-inch 4A common cathode digital tube, the display content is more intuitive and clear, and the button-type operation is more convenient. 6. Using relays, the mechanical failure rate is greatly reduced, and the service life can reach 250,000 times, which is significantly longer than the 100,000 times of other brands of relays.

P-11: Jog (close the signal relay, and disconnect the relay when the signal disappears) P-12: Self-locking (give a signal to the relay to pull in, and then give a signal to disappear the relay to disconnect) P-13: When the signal is given, the relay will automatically stop at the time of closing A, and the trigger will be invalid during the delay period. P-14: When the signal is given, the time for the relay to pull in A will automatically stop, and re-time will be triggered during the delay period. P-15: When the signal is given, the time for the relay to pull in A will automatically stop, and the superposition timing will be triggered during the delay period. P-16: When the signal is given, the relay will automatically stop when the A time is closed, and the reset will be triggered during the delay period. P-17: Give the signal → the relay is closed, after the input signal is disconnected, start timing A time is disconnected, during the delay period, the signal remains output again, and the timing stops P-18: After the power is turned on, the relay will be pulled in immediately, and will be turned off after a delay of A time until the next power-on. P-21: Give signal, after delay A time → relay pulls in. P-22: Give a continuous signal, after the time exceeds A → the relay is pulled in, the signal disappears, and the relay is disconnected. P-23: After the signal disappears for more than A time, the relay is pulled in, there is a signal, and the relay is disconnected. P-24: There is a signal. After the A time is exceeded, the relay pulls in. After the signal disappears and exceeds the A time, the relay is disconnected. P-25: There is a signal. After the time exceeds A, the relay is closed. After the signal exceeds the time A again, the relay is disconnected. P-26: There is a signal, the relay will stop after pulling in A for a time, and when the signal disappears, the relay will stop after pulling in A again. P-27: There is a pulse signal detected, the relay does not work, there is no pulse signal, the relay delays A time to pull in.

Function settings: Press K1 for the first time, it takes more than 1 second to be effective, to prevent false triggering. Display: P-11: K2 adjusts the main mode, K3K4 adjusts the function. Press K1 for the second time, the screen displays: A001: K2 and K3 adjust the first time A, K4 adjusts the decimal point (time unit) Press K1 for the third time, the screen displays: BO01: K2 and K3 adjust the second time B, K4 adjusts the decimal point (time unit) Press K1 for the fourth time, it will display "------" to enter the standby state Press K4 in standby state to permanently turn off/on the display and switch to low power mode

Box package