Wood Doors VENEERED DOORS, Wooden Interior Doors, Natural Swing TR Professional Commercial Traditional Online Technical Support

* Solid materials door stile (internal frame) used for making doors.
* The optimal humidity rate is %12 consisted of the coniferous tree which was dried privately.
* After it was purified from the snags, it is combined with finger-jointed, destroyed the deformation, and increased the
resistance.
* The size of the stiles’ section is 28*42
* There are air space grooves that have 6*3mm measures inside the stiles.
* There will be a double stile on the sub of the door leaf.

* Also there will be an extra stile for opening lock housing.
* The door leaf is made up of 6mm MDF covered by the veneer. The lock housing is drilled for a 40mm oval lock. Hinge housing and
lock striker are drilled if there is a special request.
* There will be used honeycomb which has resin-based, 1,3 kg/cm2 resistance and comply with TSEK in the framework.
* General principles as mentioned above are the same for producing glazed doors. While the carcass process there will be a solid
stile on the housing of glass opening that will be drilled in the middle of the door leaf.

* All the door frames are made from 42mm sandwich panels (12mm MDF+18 mm solid wood + 12mm MDF)
* All the door frames are suitable for using regulated architraves and the architraves montage grooves, gasket grooves and rabbet
will be drilled.
* The door surface will be cover with a veneer.
* The join of the door head will be 45 degrees. There will be a drill for the special screw.
* There will be drilling for gasket groove in the frame rabbet in order that the sound and heat insulation is provided.

1. All the interior doors are produced to TSE (TS 1905) standards.
2. The press doors are installed as a set (frame + door leaf) and they are tested in the bootstrap machines.
3. We rigidly and routinely test selected products with drilling methods and record the results. These include: * Horizontal
resistance test
* Vertical
resistance – hanging test
* Heavy/soft
impact test
* Light/hard
impact test

* In accordance with details of adjustable moldings, they will be made up of MDF that has 12 mm thickness and 80 mm width.
* The surface of the moldings will be covered with a veneer.

* For top surface varnish, we use the best quality that belongs to respective companies.
* All of the materials are acrylic-based varnish and comply with environmental and human health and it includes.
* The fill and finishing varnishes used in production, have very-high resistance to scratch yellowing.

PRICE IS FOR SIZES SUCH AS 208 x 68-78-83-88-93-98 x 16 CM DOOR LEAF: 6 MM MDF COVERED BY 0,50 MM WOOD VENEERED + CORE IS SEMI SOLID (alternative colors are available upon request) DOOR FRAME : 42 MM SANDAWICH PANEL (12MM MDF+18MM SOFT WOOD+ 12MM MDF) COVERED BY WOOD VENEERED ARCITRAVE : 12 MM MDF COVERED BY WOOD VENEERED *ACCESSORIES ARE NOT INCLUDED IN PRICE