Single-Stage Suspended Centrifugal Water Vertical Sludge Slurry Pump For Sale

Vertical slurry pump has been designed to work over sumps and pits to transfer abrasive large particles and high density slurries.Being of cantilevered design, they do not require a shaft seal or water flush and can be run dry for long periods with no damage to pump components.

The assembly is grease lubricated and sealed by labyrinths; the upper is grease purged and the lower protected by a special flinger. The upper or drive end bearing is a parallel roller type whilst the lower bearing is a double taper roller with preset end float. This high performance bearing arrangement and robust shaft eliminates the need for a lower submerged bearing. √ Casing – Has a simple bolt-on attachment to the base of the column. It is manufactured from a wear resistant alloy for the SP and from molded elastomer for the SPR. √ Impeller – Double suction impellers (top and bottom entry) induce low axial bearing loads and have heavy deep vanes for maximum wear resistance and for handling large solids. Wear resistant alloys, polyurethane and molded elastomer impellers are interchangeable. √ Lower Strainer – Bolted metal or polyurethane for SP; molded snap-on elastomer for SPR. √ Discharge Pipe – Metal for SP; elastomer covered for SPR. All wetted metal parts are completely rust protected.

1.Small parts packed in the wooden cases. 2.Big parts packed by plastic membrane. 3.The whole big machine is loaded in the container.

or any way the customer requires.

1.Inquiry and consulting support. 2.Ore sample testing support. 3.View our Factory. 4.Design Flowchart.

1.Training how to instal the machine, training how to use the machine.

1.How is the quality of your products?(mining equipment/machine) Answer: Our products are manufactured strictly according to national and international standard, and we will do a test on every machine before delivery. 2.Guaranteed? Answer: All of our products are guaranteed for one year. If products quality is not consistent with the description or promise we made before you place order, we promise 100% refund. 3.How about price? Answer: For the complete same machine, we can promise our quality is the best when the price same as other competitors, and our price can be lowest when the quality at standard level. 4.Service and Payment Terms? Answer: We can accept T/T and L/C; 30% deposit, 70% balance before factory delivery, which is international trade practice; Finished product pictures will be provided to customers before delivery. Contacts If you are interested in our products, please don't hesitate to contact us. Could you tell me the following questions, so that I can give you a complete solution, including best Exw-works Price Quotation! 1. Which machine do you need? like gold washing machine, spiral chute, vibrating screen, Jig separator, Shaking table, etc. 2. What is your raw ore that you plan to process? like gold ore, diamond ore, tantalite or silica sand, etc. 3. What is the capacity you need? Like 10 tones per hour. 4. What is the feeding size to the machine? and what is the discharging-material size that you require?