Products
30kw low rpm dynamo high quality magnetic electric generator Horizontal pressurized axial flow free energy water hydro turbine
30kw low rpm dynamo high quality magnetic electric generator Horizontal pressurized axial flow free energy water hydro turbine
30kw low rpm dynamo high quality magnetic electric generator Horizontal pressurized axial flow free energy water hydro turbine
30kw low rpm dynamo high quality magnetic electric generator Horizontal pressurized axial flow free energy water hydro turbine
30kw low rpm dynamo high quality magnetic electric generator Horizontal pressurized axial flow free energy water hydro turbine
30kw low rpm dynamo high quality magnetic electric generator Horizontal pressurized axial flow free energy water hydro turbine
30kw low rpm dynamo high quality magnetic electric generator Horizontal pressurized axial flow free energy water hydro turbine
30kw low rpm dynamo high quality magnetic electric generator Horizontal pressurized axial flow free energy water hydro turbine

30kw low rpm dynamo high quality magnetic electric generator Horizontal pressurized axial flow free energy water hydro turbine

FOB Reference Price: Get Latest Price
≥1 Sets
US $9430
≥5 Sets
US $9420
≥20 Sets
US $9400
Free Inquiry
Customized Request
  • Product Details
  • {{item.text}}

Quick Details

Model Number:
wg-30kw, WG-30KW
Warranty:
1year
Certification:
CE
Voltage:
220v/380v, 220v
Flow Rate:
0.027-0.36 m³/s (5-50kw)
design head:
Customized
Type:
Hydropower
Included:
Excited Brush Magnetic/Brushless excitation
Application:
Electricity Generation

Quick Details

Power:
5-50kw
Place of Origin:
Jiangsu, China
Brand Name:
ELEGE, ELEGE
Model Number:
wg-30kw, WG-30KW
Warranty:
1year
Certification:
CE
Voltage:
220v/380v, 220v
Flow Rate:
0.027-0.36 m³/s (5-50kw)
design head:
Customized
Type:
Hydropower
Included:
Excited Brush Magnetic/Brushless excitation
Application:
Electricity Generation
1. Suitable for low head (minimum three meters), large flow;
2. Pressure inlet, pressure outlet; pipe inlet, pipe outlet.
3.Separation of hydraulic turbine and generator, easy for maintenance and replacement of wearing parts.
4. Separate 2 bearings for hydraulic turbine and 2 bearings for generator, more reliable structure.
5. Hydraulic turbine bearing has independent oil lubrication system, bearing life is longer.
6. Brushless excitation generator, no need to replace carbon brushes and copper rings,easy to maintain.
Power
Head (meters)
Flow rate (m3/s)
Tube inner diameter/mm
Installation Head
5kw
5-12m
0.027-0.082
200
10
8kw
5-12m
0.055-0.125
250
10
6-20m
0.027-0.12
200
15
10kw
6-12m
0.055-0.126
250
10
10-25m
0.027-0.15
200
20
15kw
8-15m
0.08-0.2
300
10
8-25m
0.08-0.2
250
15
10-35m
0.02-0.12
200
20
20 kw
10-35m
0.08-0.25
200
30
8-30m
0.08-0.25
250
20
8-15m
0.1-0.35
350
10
30kw
10-40m
0.05-0.24
250
30
8-30m
0.052-0.23
300
20
40kw
8-40m
0.052-0.25
300
30
50kw
8-30m
0.1-0.4
350
20
8-30m
0.1-0.36
300
30
Installation Procedure: After the unit foundation be poured with concrete is solidified, the unit is installed in place and then watered in sequence. The water level must be measured with a level gauge to ensure that the unit is fixed in a horizontal position. The gap between the unit and the floor should be sealed with cement, and no water seepage is allowed. After the unit is installed, check again and turn the turbine shaft of the turbine by hand. If the machine is flexible, the installation is finished. Installation requirements: The bottom plane of the turbine in close contact with the foundation plane. NOTE: 500w hydro generator only can be used with the following two conditions:. 1) The vertical Water level difference between the unit foundation and the hydro generator must be in this range:7-15M 2) The water flow must can fully fill the water tube that is above 7.5cm diameter all the time.
• Q: Are you a factory?
A: We are the factory/manufacturer so we can control production costs and then sell at the lowest price.
•Q: Can I get some samples?
A: Yes, sample order is available for quality inspection and market testing, it will be freight collect.
• Q: What is the lead time?
A: It usually takes about 1-3 days to produce samples. It usually takes about 3-7 days to
produce the product.
• Q: What is your payment term?
A: We usually accept PAYPAL, T/T as the main payment method, other payment
methods can also be negotiated.
• Q: Quality problem?
A: If there is any quality problem or question, we can provide technical
support or return service.
• Q: How can I contact us?
A: Send your inquiry details below, click "Send"! ! ! Free samples and best
answers are waiting for you.
APP
Post My RFQ
WhatsApp
+86-17326049340