Wheel Repair Equipment Tyre Changer Machine

usage method:

1. Clean the surface of the wound that needs to be repaired on the tire and make a mark.

2. Use a grinder to roughen the surface of the wound, with an area slightly larger than the wound.

3. Apply the mixture of raw rubber and gasoline (or use hot patching glue) evenly to the roughened area with a brush.

4. Cut the appropriate size of raw glue and fill it on the wound. If the wound is large, overlap the raw glue.

5. Press the hot head onto the raw rubber (if possible, a thin layer of aluminum or iron plate can be placed on top of the raw rubber), try to align the wound with the center of the hot head, press the screw tightly, and secure the tire.

6. Turn on the power switch and the power indicator light will light up.

7. Turn on the timer switch and set it to the appropriate position. During cold start, it can be set to "7", while during hot start, the time can be slightly shorter. If there is no need for a timing, it can be set to the manual gear, and the hot head will start working.

8. At the end of vulcanization, manually turn off the power switch, loosen the tire pressing screw, carefully remove the hot head, remove the tire, and complete the entire tire repair process.

matters needing attention:

1. The power cord must be safely grounded, and it is best to install a leakage protection switch on the power supply. When replacing a fuse, the power supply must be cut off.

2. Be careful when removing the hot head to avoid burns.

3. Equipment must be kept away from corrosive substances such as acids and alkalis.

4. If a long wound on the inner tube needs to be repaired, an elliptical base plate should be used, and small eyes should be punched at both ends of the wound to prevent cracking and air leakage after inflation.

5. If there is dirt stuck to the hot iron after use, it should be polished clean with fine sand, otherwise it will affect the flatness and smoothness of the tire repair.

This tire repair machine has an automatic adjustment timing function, making tire repair easier.