- Product Details
- {{item.text}}
Quick Details
-
EINECS No.:
-
230-391-5
-
Place of Origin:
-
Hunan, China
-
Brand Name:
-
MAGPOW
-
Model Number:
-
MPB122
-
Type:
-
rtv silicon gasket maker
-
Color:
-
transparent, blue, grey, red, black
-
Prolapse distance vertical:
-
less than 3mm
-
Prolapse distance aclinic:
-
no distortion
-
Density:
-
0.93-0.98
-
Extrusion:
-
more than 400ml/min
-
Surface Dry Time:
-
5-15 min
-
Shore A(HSA):
-
20-30
-
Using temperature:
-
-40 to 150 centigrade
-
Stock:
-
Full and can accpet customer's brand and design
-
Item:
-
white rtv silicone gasket maker
Quick Details
-
CAS No.:
-
7085-85-0
-
Other Names:
-
Silicone Sealant
-
MF:
-
C6H7NO2
-
EINECS No.:
-
230-391-5
-
Place of Origin:
-
Hunan, China
-
Brand Name:
-
MAGPOW
-
Model Number:
-
MPB122
-
Type:
-
rtv silicon gasket maker
-
Color:
-
transparent, blue, grey, red, black
-
Prolapse distance vertical:
-
less than 3mm
-
Prolapse distance aclinic:
-
no distortion
-
Density:
-
0.93-0.98
-
Extrusion:
-
more than 400ml/min
-
Surface Dry Time:
-
5-15 min
-
Shore A(HSA):
-
20-30
-
Using temperature:
-
-40 to 150 centigrade
-
Stock:
-
Full and can accpet customer's brand and design
-
Item:
-
white rtv silicone gasket maker
RTV Silicone Rubber 704 Gasket Maker Coating Adhesive Glue
This Blue Gasket Maker is for gear case, fore-and-art board, water pump of car, auto bike, plane flange, cover board of other machine equipment.
1. Cleaning up the surface with the cotton fabric, guarantees the surface not to have the dust, the greasy dirt, the rusty stain and so on.
2. In order to obtain good outward appearance, paste the temporary protection adhesive tape , near the place to be pasted after clean the surface, pull out after paste glue.
3. Pierce the seal with the cap, cover the mouth, cut bevel the tube mouth.
4. Spread the sealant evenly on the place which need to be sealed or bonded. The operation should be continuously, guarantee the sealant continuously squeeze out at cylinder shape, move the glue mouth evenly and slowly, prevent the form of bubble or hole is move too fast.
5. The sealant form shape at approximately 10 minutes, when assembly maintains the gasket thickness, fold gathers the curing at normal temperature 24 hours.
1. Cleaning up the surface with the cotton fabric, guarantees the surface not to have the dust, the greasy dirt, the rusty stain and so on.
2. In order to obtain good appearance, paste the temporary protection adhesive tape , near the place to be pasted after clean the surface, pull out after paste glue.
3. Pierce the seal with the cap, cover the mouth, cut bevel the tube mouth.
4. Spread the sealant evenly on the place which need to be sealed or bonded. The operation should be continuously, guarantee the sealant continuously squeeze out at cylinder shape, move the glue mouth evenly and slowly, prevent the form of bubble or hole is move too fast.
5. The sealant form shape at approximately 10 minutes, when assembly maintains the gasket thickness, fold gathers the curing at normal temperature 24 hours.
This Blue Gasket Maker is non-flammable, keep in 10-27℃ cool dry place seal storage, the shelf life is 12 months.
Specification: 85g/set, 12sets/inner, 12inners/ctn
Meas: 67.3 * 42.8 * 28.9cm
Leave thickness for gasket when reassembling. do not over-tighten bolts. remove excess silicone with dry cloth or alcohol wipe. silicone dries to touch in 1 hour. allow 24 hours to fully cure and bond. REPLACE CAP AFTER USE.
HUNAN MAGPOW ADHESIVE GROUP CO., LTD
Was founded in 1989, Leaders at all levels of care and guidance, in the community friends and the majority of customers with the help and support, has gone through more than 20 years of arduous pioneering and steady development process. Companies from the original workshop-style processing plant to national "Torch Plan" implementation of enterprises, national standards of enterprises, the state's key high-tech enterprises. Group assets worth 150 million.
As the country's largest private enterprise adhesive technology research institute. The Research Institute covers an area of 3600 square meters. A total of five layers, Divided into 28 advanced equipment, full-featured professional laboratory. The company invested more than 1100 million one-time, And The introduction of more than 20 sets of world-class test and testing equipment from Germany and Taiwan. The Research Institute has made a number of international advanced level of scientific research and national invention patents. At present, the company is actively reporting to create a national technology research institute-Global Adhesive Laboratory.
Reply within 24 Hours
Professional consultation service is available within 24 hours after receiving your feedback regarding the iterms that you bought. Global Insurance Service
Global insurance service
guarantees the safety of iterms when installation and application.
Compensation Policy
Any quality problem caused by our company side with enough evidence, we promise you that if could bere-produced for free.
Contact us, you will get more than what you see!
