12 volt dc car washer submersible water pump 12v 24 volt dc water pump (ZQB-12)

**Usage Condition of 12v dc submersible water pump 12 volt dc car washer pump

1. Before using 12v dc submersible water pump 12 volt dc car washer pump, please check wheater the power voltage confirm with the nameplate.

2. While connecting wires, please attention that the red cable wire should be connect with positive pole(+), the other wire should be connected with negative pole(-).

3. Please do not keep the pump motor idling more than 1 minutes which may demage the oil seal.

4. Do not pull the cable wire when put in or pull out the pump in the water.

5. Before start up pumping or using the pump, remember put the pump into water in advance.

6. If the water source has sediment and other sundry, please put the pump in a bamboo basket or other anti-pollution equipment to prevent blocking.

7. After using or do not use the pump, the battery is not suitable to be immersed in water for long time, so please pull out the pump in ventilated and dry place.

8. If the head is too low, please check if the connecting wire is too long or the wire is less than pump's cable wire. Open the bottom mesh net to check whether the impeller is blocked or not, or the power is not enough.

**Application of 12v dc submersible water pump 12 volt dc car washer pump

1. Garden Watering of 12v dc submersible water pump 12 volt dc car washer pump

2. Irrigation of 12v dc submersible water pump 12 volt dc car washer pump

3. Car Wash of 12v dc submersible water pump 12 volt dc car washer pump

4. Marine Pumping of 12v dc submersible water pump 12 volt dc car washer pump