Factory Direct Sale 433 Mhz Universal Wireless Remote Control Switch 12V 1CH 10A Relay Receiver Module and Transmitter Applicanc

The specification of this set of 12 volt wireless remote control system :

Feature:

·         Wireless control, easy to install

·         Control Lights, Motors, Fans, electrically operated Doors/Locks/Windows/Blinds/Cars or Other Appliances with AC220V,AC85V-260V OR DC12V..

·         You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors.

·         This switch can learn different coding remote controls (such as 2262,1527 ect.)

·         One/several transmitters can control one/several receivers simultaneously.

·         If you use two or more receivers in the same place, you can set them with different codes. If you use multi-button transmitter, you can control the controller with different buttons, it won’t affect each other.

·         Operating  Frequency: 315MHz / 433MHz

·         The wireless receiving controller, with high confidentiality, stable performance, low power consumption characteristic, jump line or dial the code switch coding.

About  Receiver:

·         Channel:  1 CH

·         Radio Frequency:  315MHZ/433MHZ

·         Operating Voltage:  DC12V

·         Operating Type:

Jog /Momentary/Non-Latched (Press and hold->On, Release->Off )

Interlock /Latched (Press -> On; Press other button -> Off )

Self-lock/Toggle (Press->On, Press again->Off )

·         Coding Type: Learning code

·         Maximum Working Current: 10A

·         Output Mode: Without voltage output (also called Contact output)

·         Step-down approach: resistance-capacitance (RC)

About Working way/ output Way:

·         Output Working way for learning code switch-Jog, Self-Lock, interlock, changed by soldering or jump cap.

Momentary/ Jog--Press and hold -> On; Release -> Off.

Toggle/ Self-lock--Press -> On; Press again -> Off·

Latched/   Interlock--Press -> On; Press other button -> Off.

About  Transmitter:

·         Buttons: 2 Button

·         Working Voltage: DC12V (DC12V 10A)

·         Operating  frequency :315/433MHz

·         Remote Control Distance: 10-50m

·         Encode: Fixed code by soldering and learning code

Pay attention:

·         The default setting of output way is latched, press OPEN BUTTON is on, PRESS OFF BUTTON is off. If you need other output way can leave a message to change it for you before the delivery.

·         Here is the 2 Channel switch and 2-button remote control .you can choose the working way as you need. we suggest you choose Latched .

·         The theoretical distance is 10-- 50m, which shall be operated in an open ground; no barriers and no any interference. However, in actual operation, it is hindered by trees, walls or other obstacles, or interfered by other signals. Therefore, the actual distance cannot reach 100m. If you need longer range, please choose other series of remote control, such as 1000m/3000ft; or you can add the External Extend Antenna or Transponder on the receiver to extend the range.