Purpose:
It is used for bonding and filling of electronic and electrical products. The bonding and filling between the roadbed plate and the bonded surface has high thermal conductivity, excellent adhesion, slight corrosion to copper, PC (polycarbonate), such as the use of our company's deoxime type can solve this problem.
Packaging storage transportation requirements:
It should be packed with aluminum tube or plastic tube, with the specifications of 100ml aluminum tube and 300mlPE tube. It should be stored in a dry and cool place (below 26℃). The shelf life of this product is within 6 months from the date of manufacture.
Usage and precautions:
First clean the bonded sealing surface, and then apply the product on the surface (thickness should not exceed 6mm) to perform adhesive sealing. The surface drying time of the product is less than 30 minutes, and it will be fully cured after 24 hours. After the operation, tighten the cap and seal the unused glue immediately. When used again, if there is a little crust on the seal, it can be removed without affecting normal use. Glue in the storage process, the nozzle may also appear a small amount of curing phenomenon, can be removed after normal use, does not affect the performance of the product.
