- Product Details
- {{item.text}}
Quick Details
-
EINECS No.:
-
N/A
-
Place of Origin:
-
Guangdong, China
-
Brand Name:
-
GOOD
-
Model Number:
-
HN-991
-
Type:
-
solvent based chloroprene adhesive
-
light transparent:
-
viscous liquid
Quick Details
-
CAS No.:
-
N/A
-
Other Names:
-
decoration adhesive
-
MF:
-
N/A
-
EINECS No.:
-
N/A
-
Place of Origin:
-
Guangdong, China
-
Brand Name:
-
GOOD
-
Model Number:
-
HN-991
-
Type:
-
solvent based chloroprene adhesive
-
light transparent:
-
viscous liquid
super glue ,chloroprene glue,flooring adhesive,general super glue for outdoor playground, interior finish
Product Description
Item No.HN-991
The flooring adhesive is also called chloroprene adhesive and contact adhesive, which can bond various decoration material in interior decoration, such as flooring carpet, bonding panels and sheets made of different materials together.
This flooring adhesive is environmentally friendly, lowering the potential health hazards to the users and people.
Applicable materials
Suitable for the bonding of different materials in different procedure.
Widely used for panel furniture/fireproof board/aluminum-plastic composite board/plastic/wood veneer/plank/plywood board/EVA/PVC/fabric/fiber/floor/rubber etc.
Application areas
Suitable for interior decoration, advertising, car interior decoration.rubber floor mat to cement floor.
Specially suitable for villa and upscale hotels, fortune plaza, nobility district, headquarters etc. With high-quality and strictly required elaborate decoration.
Method of use
1. The materials to be bonded should be dry, clean and free of dust, grit, loose materials, oil or grease.
2. Using a brush or spreader, apply a thin even coating of adhesive to both of the surfaces.
3. Allow the solvent content to evaporate before bonding the materials. The time for this evaporation will depend on the temperature and humidity. On absorbent or permeable materials such as leather/chipboard, bonding may be possible within a matter of 2-3 minutes of application; On non-absorbent or non-permeable materials (eg. Formica/metal) a minimum of 15 minutes should elapse before the surfaces are bonded.
4. Bond the materials under firm pressure.
5. Dried coatings of HN-991 may be reactivated by wiping over the surfaces with suitable solvent.
Properties
|
Total Solids %: 23.0 + 1 % |
|
Viscosity (cps at 25 °C ) 3200 ~ 3600 cps |
|
Typical Specific Gravity: 0.87 |
|
Flash Point <0 oC |
|
Coverage 3-5 square meters of bonded material per litre |
|
Minimum Open Joint Time 2-15 minutes - depending upon absorbency of materials to be bonded |
|
Maximum Open Joint Time Cleaner 20 minutes |
Contact
Ms Merry,
cell 0086 13923155895,
skype merryliu88,
wechat 1994035849
whatsapp 008613516523280
