When initially filling the UFH heating system it is important to remove the air in the pipework.
In order to do this a hose should be connected to the upperfill valve and the bottom valve should be opened to allow the water to
be flushed in to a bucket or drain.
First isolate all but one of the heating circuits by turning off the relevant decorators's caps.
Next flush out the open circuits with clean water until it runs freely from the bottom valve.Isolate this circuit and open the
next one.
Repeat this until all circuits have been filled.Introduce any inhibitor or antifreeze at this stage.
Packing
SPECIFICATIONS FOR 25 TON CRAWLER EXCAVATORCircuitsLength(mm)PackingCarton size(cm)N2+11805 sets / ctn40*28*35N3+1230N4+1280N5+1
330N6+13805 sets / ctn58*28*35N7+1430N8+1480N9+1530N10+15805 sets / ctn79*28*35N11+1630N12+1680
- Product Details
- {{item.text}}
Quick Details
Quick Details
-
Place of Origin:
-
China
-
Material:
-
PPR
Product Description
Nylon or Stainless steel distributor 9 underfloor heating circuits
Heating distributor
Product feature:
1. 304 stainless steel(food grade, nickle>8%) 100% material guranteed
2. Excellent surface treatment, 3/4" unicon connector
3. Swiss made intelligent flow meter for monitor the flow rate
4. Dislocation mounting brackets
5. Each set strictly QC tested, won't cause any leakage in usage
6. Each set in an inner box packing for your easy carrying
7. Max working pressure: 1.0Mpa
Heating distributor
Product feature:
1. 304 stainless steel(food grade, nickle>8%) 100% material guranteed
2. Excellent surface treatment, 3/4" unicon connector
3. Swiss made intelligent flow meter for monitor the flow rate
4. Dislocation mounting brackets
5. Each set strictly QC tested, won't cause any leakage in usage
6. Each set in an inner box packing for your easy carrying
7. Max working pressure: 1.0Mpa
prse-assembled distribution manifold 2-12 ports complete with -isolating ball valves, adjustable flow meters,fill and drain
points, automatic air vents.
prse-assembled distribution manifold for immediate mounting for both radiator and underfloor systems
1,Available in 1" and 1-1/4" sizes, from 2 ways to 12 ways with flow control valves to suit a wide range of system requirements
2,Can be surface mounted, concealed in a choice of purpose designed plastic or metal cabinets or within a partition wall for a
flexible solution to location
3,Manifold flow and return outlets are offset for space saving and ease of installation
4,Ball valves, fittings and pipe connectors for a wide range of pipe types and sizes
Technical date:
Material: main pipe 304 stainless steel
Medium: water(Max. percentage of glycol is 30%)
Operating pressure: PN16
Medium temperature:0-100 degree C
Connection: 1" , 1-1/4"
Outlet: 3/4"*18
Adapter: 16*2.0mm , 20*2.0mm
Distance between outlets:50mm
Installation:
First step:Before installation the flow manifold bar needs to be twisted around so the flow gauges are on top with the
connections below(as per pictures), to do this loosen the securing screws, twist the bar to correct orientation and re-tighten the
screw. The manifolds are packed in this way to protect the flow gauges whilst in transit.
Use the screws and plugs provided to mount the pre-assembled flow and return manifolds assembly to the ball (please ensure that
the screws and plugs provided are appropriate for your wall construction,if not alternative suitable fixings should be used)
points, automatic air vents.
prse-assembled distribution manifold for immediate mounting for both radiator and underfloor systems
1,Available in 1" and 1-1/4" sizes, from 2 ways to 12 ways with flow control valves to suit a wide range of system requirements
2,Can be surface mounted, concealed in a choice of purpose designed plastic or metal cabinets or within a partition wall for a
flexible solution to location
3,Manifold flow and return outlets are offset for space saving and ease of installation
4,Ball valves, fittings and pipe connectors for a wide range of pipe types and sizes
Technical date:
Material: main pipe 304 stainless steel
Medium: water(Max. percentage of glycol is 30%)
Operating pressure: PN16
Medium temperature:0-100 degree C
Connection: 1" , 1-1/4"
Outlet: 3/4"*18
Adapter: 16*2.0mm , 20*2.0mm
Distance between outlets:50mm
Installation:
First step:Before installation the flow manifold bar needs to be twisted around so the flow gauges are on top with the
connections below(as per pictures), to do this loosen the securing screws, twist the bar to correct orientation and re-tighten the
screw. The manifolds are packed in this way to protect the flow gauges whilst in transit.
Use the screws and plugs provided to mount the pre-assembled flow and return manifolds assembly to the ball (please ensure that
the screws and plugs provided are appropriate for your wall construction,if not alternative suitable fixings should be used)
Title goes here.
Specification
|
item
|
value
|
|
Warranty
|
5 years
|
|
After-sale Service
|
Online technical support, Onsite Training, Onsite Inspection, Free spare parts, Return and Replacement
|
|
Project Solution Capability
|
graphic design, 3D model design, Cross Categories Consolidation
|
|
Application
|
Office Building
|
|
Design Style
|
Modern
|
|
Place of Origin
|
China
|
|
|
|
Packing & Delivery
According to the buyer requests for packaging
Hot Searches
