Drywall Fiberglass Self Adhesive Scrim Fiber Mesh Jointing Tape For Gypsum Board 10mesh

Alkali -r esistan ce f iberglass self-adhesive mesh tape

Introduction

Fiberglass se lf -adhesive mesh tape is a self-adhesive, high tensile strength tape. The special adhesive coating allows drywall tape to outperform other joint sealing methods, particularly in areas of high humidity. Perfect for joints, cracks, and holes on a variety of surfaces including smooth and unevenly coated surfaces. Widely used in gypsum board, cement board, drywall, and EPS joint and reinforcement. We have a market in Europe, the Middle East, Southeast Asian, and South American Countries.

Characteristics

1. Strong Fiberglass Mesh Strengthens Joints

2. Mesh Design Eliminates Bubbles and Blisters

3. Good performance of alkaline-resistance

4. High tensile strength and deformation-resistance

5. Excellent self-adhesive performance

6. Full Assortment of Roll Sizes, Styles, and Colors

7. For Use With Setting-Type Joint Compounds and Plaster

8. No need to apply a primer in advance, quick to use and easy to apply

Specification

Self-adhesive Fiberglass Mesh Tape
1. Excellent self-adhesive, High deformed resistant 2. High alkali-resistance, High tensile strength 3. Well-arranged performance, Easy to be operated
Category	Specification	Density Count/25mm		Unit Weight g/m²	Tensile Strength ≥N/5cm x 20cm		Woven Structure	Content Of Resin%
		Warp	Weft		Warp	Weft
Standard	DWT50-8x7	8	7	55	500	450	Leno	28±2
	DWT60-7x8	8	8	60	500	500	Leno	28±2
	DWT65-9x9	9	9	65	550	550	Leno	28±2
	DWT70-9x9	9	9	70	550	600	Leno	28±2
	DWT75-9x9	9	9	75	550	650	Leno	28±2
Extra thin	DWT75-20X10	20	10	75	700	700	Leno	28±2
High strength	DWT110-5X5	5	5	110	1000	1000	Leno	28±2

Width: 50mm-1240mm

Weight: 60g/m2-110g/m2

Mesh size: 8x8/inch, 9x9/inch, 12x12/inch, 20x10/inch

Popular Specification :8x6 - 50g/m2 8x8 - 65g/m2 9x9 - 75g/m2

Standard Size :5cmx20m5cmx45m5cmx90m5cmx153m

Construction method:

1. Keep it clean and dry.

2. Put tape on the cracks and press tightly.

3. Make sure that the gap is covered by tape, then use a knife to cut off the excess tape, and finally brush with mortar.

4. Let it air dry, then lightly sand.

5. Fill enough paint to make the surface smooth.

6. Cut off the leaking tape. Then, pay attention that all the cracks have been properly repaired, and use fine composite materials to modify the surrounding area of the joints to make it as clean as new.

Customized:

1. Label: Could be customized, Free design

2. Fiberglass drywall joint tape: Color, Size

3. Paper tube: Could be customized, Free design

Packing/ Delivery:

Each roll wrapped up in shrink film and then packed in a cardboard box. The carton is stacked horizontally or vertically onto pallets. All pallets are stretch wrapped and strapped to maintain stability during transport.

PRODUCT CATEGORIES