- Product Details
- {{item.text}}
Quick Details
-
Model Number:
-
Xtester-PT-2740
-
Measuring range:
-
2A~60A 60A~500A
-
Conversion ratio:
-
20mV/A(50:1) 2mV/A(500:1)
-
Bandwidth:
-
DC-300kHz
-
Accuracy:
-
2%
Quick Details
-
Warranty:
-
1year
-
Place of Origin:
-
Guangdong, China
-
Brand Name:
-
Xtester
-
Model Number:
-
Xtester-PT-2740
-
Measuring range:
-
2A~60A 60A~500A
-
Conversion ratio:
-
20mV/A(50:1) 2mV/A(500:1)
-
Bandwidth:
-
DC-300kHz
-
Accuracy:
-
2%
Xtester-PT2740 (300kHz,2A-500A)current probe
INTRODUCTION
|
Xtester- PT-2740 - Current measurement range from 0.4A to 500A (two-gear conversion). - Current clamp is the use of Hall effect technology to measure AC/DC current.- Can measure the RMS value under AC/DC signal - Low phase displacement ensures accurate voltage output of the measured power. - Can be used with multimeters, recorders, acquisition units, oscilloscopes, etc. |
||
Technical Specification
|
Model |
Xtester-PT-2740 |
|
Measuring range |
2A~60A 60A~500A |
|
Conversion ratio |
20mV/A(50:1) 2mV/A(500:1) |
|
Bandwidth |
DC-300kHz |
|
Accuracy |
2% |
|
Rise time |
1.2μs |
|
Working Voltage |
600V |
|
Battery |
9V alkaline battery |
|
Low battery Indicate |
with green LED light when >6.5V |
|
Overload indicator |
Red LED light indicates the over measuring current, change the range |
|
Clamp.Dia. |
11mm Diameter |
|
Operating temperature |
0~50℃ |
|
Cable length |
2m |
|
Size |
231*36*67 mm |
|
Weight |
330g(including battery) |
Selection Guide
| Model | Xtester-PT-710 | Xtester-PT-2710 | Xtester-PT-2720 | Xtester-PT-2740 |
| Measuring Range | 0.05A-10A 10A-100Apeak | 0.4A-10A 10A-60A | 0.4A-10A 10A-200A | 2A-60A 60A-500A |
| Conversion Ration | 100mV/A(10:1) 10mV/A(100:1) | 50mV/A(20:1) 5mV/A(200:1) | 50mV/A(20:1) 5mV/A(200:1) | 20mV/A(50:1) 2mV/A(500:1) |
| Bandwidth | DC-100kHz | DC-200kHz | DC-300kHz | DC-300kHz |
| Accuracy | 2% | 2% | 2% | 2% |
| Rise time | 3.5μs | 1.75μs | 1.2μs | 1.2μs |
| Working Voltage | 600V | 600V | 600V | 600V |
| Battery | 9V alkaline battery | |||
| Low battery Indicate | When greater than 6.5V, the LED is green | |||
| Overload indicator | The red LED indicates that the measurement current is too high and the range needs to be changed | |||
| Clamp.Dia. | Diameter 11mm | |||
| Operating temperature | 0-+50℃ | |||
| cable length | 2m | |||
| Size | 231x36x67mm | |||
| Weight | 330g(include battery) | |||
| Temperature and humidity | 0-50℃,20-75% RH | |||
