Explore More Products
- Product Details
- {{item.text}}
Quick Details
-
Warranty:
-
1 year
-
Brand Name:
-
SUNTECHMACH
-
Model Number:
-
4DSY-4
-
Place of Origin:
-
Zhejiang, China
-
Horsepower:
-
1.5KW
-
Cable Length:
-
82cm
-
Outlet Size:
-
180 L/H/500L/H
-
Power:
-
1100W
-
motor:
-
380V
-
Product name:
-
Strong power hydro electric pressure testing pump water pump
-
Fuel:
-
Gasoline
-
Material:
-
Steel & Copper
-
Color:
-
Blue or customized
-
Weight:
-
120KGS
-
OEM:
-
OEM Acceptable
-
Certification:
-
ISO9001
-
Feature:
-
Eco-Friendly
Quick Details
-
Application:
-
Industrial Utilities, Irrigation and Agriculture, Wastewater Transport and Flood Control, wastewater treatment, Water Distribution
-
Pressure:
-
High Pressure
-
Voltage:
-
380V
-
Warranty:
-
1 year
-
Brand Name:
-
SUNTECHMACH
-
Model Number:
-
4DSY-4
-
Place of Origin:
-
Zhejiang, China
-
Horsepower:
-
1.5KW
-
Cable Length:
-
82cm
-
Outlet Size:
-
180 L/H/500L/H
-
Power:
-
1100W
-
motor:
-
380V
-
Product name:
-
Strong power hydro electric pressure testing pump water pump
-
Fuel:
-
Gasoline
-
Material:
-
Steel & Copper
-
Color:
-
Blue or customized
-
Weight:
-
120KGS
-
OEM:
-
OEM Acceptable
-
Certification:
-
ISO9001
-
Feature:
-
Eco-Friendly
Products Information
|
Product Name
|
Strong power hydro electric pressure testing pump water pump
|
|
Model
|
4DSY-4
|
|
Features
|
1.For quick and exact compression testing
2.For testing of leaks in installations, especially for use in heating, compressed air, refrigeration systems, oil installations, sprinkler systems and other small bore pipe applications |
Precautions when using electric pressure test pump
1. Before use, firstly tighten the switch clockwise.
2. The working medium used must be filtered by a 100 mesh/inch filter before being injected into the water tank, and the suction port cannot leak out of the water surface.
3. It should not be used in the workplace with acid, alkali and corrosive substances.
4. After stopping use, use kerosene or kerosene as a medium to filter it.
2. The working medium used must be filtered by a 100 mesh/inch filter before being injected into the water tank, and the suction port cannot leak out of the water surface.
3. It should not be used in the workplace with acid, alkali and corrosive substances.
4. After stopping use, use kerosene or kerosene as a medium to filter it.
Instruction for use
1. Check that the gasket and the joint are well matched, and connect the water inlet pipe correctly;
2. The fire wire and ground wire must be correctly connected before use, and must not be wrongly connected! The power cord should be connected to a socket with leakage protection.
3. Loosen the pressure regulating knob first, do not start the motor with load, so as not to damage the motor
4. Check the filter regularly to avoid clogging
5. If the water pump cannot absorb water, please add a certain amount of water from the water inlet pipe to the water pump.
6. Prevent air from entering the water pump.
7. After the pressure test is over, loosen the pressure adjustment knob, add a little 20# oil, and keep it loose. At the same
time, turn on the power and add oil at the water inlet to run for half a minute.
8. It is strictly forbidden to start the machine without water, otherwise the sealing ring and piston ring will be easily damaged.
9. The water source should not have impurities, otherwise the seal will be easily stuck, which will cause the phenomenon of no water absorption.
10. Water leakage at the lower part of the pump body means that the sealing ring is damaged, and the sealing ring must be replaced.
11. Please use the pressure regulating button correctly, do not turn the pressure regulating knob to the end, otherwise the high pressure will cause high pressure damage to the meter, etc.
2. The fire wire and ground wire must be correctly connected before use, and must not be wrongly connected! The power cord should be connected to a socket with leakage protection.
3. Loosen the pressure regulating knob first, do not start the motor with load, so as not to damage the motor
4. Check the filter regularly to avoid clogging
5. If the water pump cannot absorb water, please add a certain amount of water from the water inlet pipe to the water pump.
6. Prevent air from entering the water pump.
7. After the pressure test is over, loosen the pressure adjustment knob, add a little 20# oil, and keep it loose. At the same
time, turn on the power and add oil at the water inlet to run for half a minute.
8. It is strictly forbidden to start the machine without water, otherwise the sealing ring and piston ring will be easily damaged.
9. The water source should not have impurities, otherwise the seal will be easily stuck, which will cause the phenomenon of no water absorption.
10. Water leakage at the lower part of the pump body means that the sealing ring is damaged, and the sealing ring must be replaced.
11. Please use the pressure regulating button correctly, do not turn the pressure regulating knob to the end, otherwise the high pressure will cause high pressure damage to the meter, etc.
Hot Products
Products Categories
![[CE] Plumbing tool water pipe manual hand hydrostatic hydro testing bench high pressure test pump](https://cdn.bestsuppliers.com/seo_products_img/dcnbcn/2eb3b0eee39531aaa246f747c1795543.png!/rotate/180/sq/300)
Hot Searches
