- Product Details
- {{item.text}}
Quick Details
-
Brand Name:
-
URUN
-
Model Number:
-
UPUMP-MIL
-
Warranty:
-
12 Months
-
Battery capacity:
-
for 18v lithium battery for MILWAUKE
-
Input voltage:
-
18-20v DC
-
Input current:
-
10A max
-
Power:
-
DC 18V 150PSI 180W
-
Material:
-
ABS
-
Inflatable tube length:
-
70cm
-
Weight:
-
0.8KG
-
Power supply type:
-
18V MILWAUKE lithium battery external
-
Battery:
-
not include
-
Adaptive vehicle model:
-
Suitable for common cars, motorcycles, bicycles, ball games, etc.
Quick Details
-
Car Fitment:
-
bugatti, Mercedes Benz, VOLVO, LEXUS(US), Mclaren, JEEP, bmw, Audi, DONGFENG KIA
-
Size:
-
21X17X8 CM
-
Place of Origin:
-
Guangdong
-
Brand Name:
-
URUN
-
Model Number:
-
UPUMP-MIL
-
Warranty:
-
12 Months
-
Battery capacity:
-
for 18v lithium battery for MILWAUKE
-
Input voltage:
-
18-20v DC
-
Input current:
-
10A max
-
Power:
-
DC 18V 150PSI 180W
-
Material:
-
ABS
-
Inflatable tube length:
-
70cm
-
Weight:
-
0.8KG
-
Power supply type:
-
18V MILWAUKE lithium battery external
-
Battery:
-
not include
-
Adaptive vehicle model:
-
Suitable for common cars, motorcycles, bicycles, ball games, etc.
Products Description
* Overland and outdoor inflator
* Conveniently fills off-road vehicle, car, and light truck tires
* Easily inflates bicycle tires, sports balls, and more
* Powerful motor delivers up to 150 PSI
This pump does not include batteries for shipment, and is designed with 18V battery pins (sockets) from/for Makitas, Dewalts, and Milwaukees. It has different maximum pressure buttons for cars, motorcycles, bicycles, basketball, and balloons, making it easy to operate without worrying about not being fully charged or exploding. And equipped with various inflation nozzles.
Working parameters of the air pump: DC15.1-21V, maximum current 7.5A, power 160 W, can inflate commonly used equipment, preset: 2.5BAR for cars, 2.4BAR for motorcycles, 45PSI for bicycles, 8PSI for basketball, instantaneous maximum air pressure 150PSI, fully open state of the trachea greater than 25L/min.
CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before adjusting or
checking function on the tool.
Installing or removing battery cartridge
CAUTION: Always switch off the tool before installing or removing of the battery cartridge.
CAUTION: Hold the tool and the battery cartridge firmly when installing or removing battery cartridge. Failure to
hold the tool and the battery cartridge firmly may cause them to slip off your hands and result in damage to the
tool and battery cartridge and a personal injury.
To remove the battery cartridge, slide it from the tool while sliding the
button on the front of the cartridge.
To install the battery cartridge, align the tongue on the battery cartridge
with the groove in the housing and slip it into place. Insert it all the way
until it locks in place with a little click. If you can see the red indicator on
the upper side of the button, it is not locked completely
button on the front of the cartridge.
To install the battery cartridge, align the tongue on the battery cartridge
with the groove in the housing and slip it into place. Insert it all the way
until it locks in place with a little click. If you can see the red indicator on
the upper side of the button, it is not locked completely
Tool / battery protection system
The tool is equipped with a tool/battery protection system. This system automatically cuts off the power to extend
tool and battery life. The tool will automatically stop during operation if the tool or battery is placed under one of
the following conditions:
Overload protection
This protection works when the tool is operated in a manner that causes it to draw an abnormally high current. In
this situation, turn the tool off and stop the application that caused the tool to become overloaded. Then turn the
tool on to restart.
Overheat protection
This protection works and the light blinks when the tool or battery is overheated. In this situation, let the tool and
battery cool before turning the tool on again.
Overdischarge protection
This protection works when the remaining battery capacity gets low. In this situation, remove the battery from the
tool and charge the battery
The tool is equipped with a tool/battery protection system. This system automatically cuts off the power to extend
tool and battery life. The tool will automatically stop during operation if the tool or battery is placed under one of
the following conditions:
Overload protection
This protection works when the tool is operated in a manner that causes it to draw an abnormally high current. In
this situation, turn the tool off and stop the application that caused the tool to become overloaded. Then turn the
tool on to restart.
Overheat protection
This protection works and the light blinks when the tool or battery is overheated. In this situation, let the tool and
battery cool before turning the tool on again.
Overdischarge protection
This protection works when the remaining battery capacity gets low. In this situation, remove the battery from the
tool and charge the battery
If the object to be inflated is connected to the tool, the air pressure of the
object is displayed on the pressure gauge when you turn on the tool. If
nothing is connected to the tool, the pressure gauge displays “0”.
You can set the air pressure on the pressure gauge. To change the unit, press
the unit button. To increase the pressure value, press the plus button. To
decrease the pressure value, press the minus button. You can set the
pressure value between 20 kPa (3 PSI) and 1034kPa (150PSI).
object is displayed on the pressure gauge when you turn on the tool. If
nothing is connected to the tool, the pressure gauge displays “0”.
You can set the air pressure on the pressure gauge. To change the unit, press
the unit button. To increase the pressure value, press the plus button. To
decrease the pressure value, press the minus button. You can set the
pressure value between 20 kPa (3 PSI) and 1034kPa (150PSI).
Hot Searches
