- Product Details
- {{item.text}}
Quick Details
-
Brand Name:
-
Tinosec/OEM
-
Model Number:
-
YN-POE216
-
Place of Origin:
-
Guangdong, China
-
POE Ports:
-
16 Ports POE Injector 16CH Switch
-
Power:
-
DC52V 65W
-
Case material:
-
Metal
-
Power Supply:
-
US/EU/AU/UK Plug Available
-
standard protocol:
-
IEEE 802.3 af/at
-
Network port:
-
2x16 RJ45 ports
-
Dimensions:
-
295mm(L)*198mm(W)*47mm(H)
-
Operating Temperature:
-
0℃ to 40℃
-
Certification:
-
CE/FCC/RoHS
Quick Details
-
Transmission Rate:
-
10/100Mbps
-
Communication Mode:
-
Full-Duplex & Half-Duplex
-
Switch Capacity:
-
9.2G
-
Brand Name:
-
Tinosec/OEM
-
Model Number:
-
YN-POE216
-
Place of Origin:
-
Guangdong, China
-
POE Ports:
-
16 Ports POE Injector 16CH Switch
-
Power:
-
DC52V 65W
-
Case material:
-
Metal
-
Power Supply:
-
US/EU/AU/UK Plug Available
-
standard protocol:
-
IEEE 802.3 af/at
-
Network port:
-
2x16 RJ45 ports
-
Dimensions:
-
295mm(L)*198mm(W)*47mm(H)
-
Operating Temperature:
-
0℃ to 40℃
-
Certification:
-
CE/FCC/RoHS
IEEE 802.3af 16CH POE Switch IPCamPower 16 Port Network Switch For POE on-vif IP Camera
About 16 Ports POE Switch:
This product is an Ethernet POE power supply switch independently developed by our company. Itis suitable for terminal network connection and power supply projects such as supermarkets, offices, small hotels, Wireless AP and factory, etc. It supports VLAN function and ultra-long transmission mode (optional). When the VLAN is enabled, the POE power supply ports are isolated from each other, and the data is uploaded and downloaded through the UPLAN port to effectively suppress network faults such as Network storms and virus attacks, etc. When applied to the monitoring network, you can turn on the ultra-far expansion function to achieve power supply and network transmission up to 250 meters.
Features:
◊
POE power supply mode, supporting the terminal equipment with IEEE 802.3AF/AT;
◊
Support power supply line sequence 1236, each port has a maximum power of 30W and an average power of 15W or more;
◊
Input voltage: 110V-240V, (Please refer to the parameter sticke for power);
◊
Support overcurrent, overvoltage, short circuit protection;
◊
Flow control mode: fll-duplex adopts IEEE 802.3x,half-duplex adopts Back pressure;
◊
Support port automatic flip (Auto MDIMDIX);
◊
Switching system using store-and-forward;
◊
All ports support wire speed switching and support jumbo frame transmission;
◊
Zero configuration feature, automatically supplied to adaptive devices;
◊
Panel indicator monitring status and help failure analysis
FAQ:
A. Which cameras can connect to this POE switch?
♦ POE camera with IEEE 802.3AF/AT +If itis nota POE camera, you can add a standard POE splitter to connect the switch to the camera.
B. The distance is only 50 meters, the camera is normal during the day, there is no image at night, and the monitor is black?
♦ This is a case where the typical camera is underpowered. Please make sure that the network cable you are using is more than five international standards or connected to the Internet.
♦ It is recommended to use a multimeter to measure the resistance of the network cable. The line of 10 meters and 0.9 ohms can run 100 meters, the line of 10 meters and 1.5 ohms can run 50 meters, and the line of 10 meters and 3 ohms can only run more than 10 meters.
C.Iused a super five network cable, but only after receiving more than 30 meters, there is no signal?
♦ Please make sure that the crystal head is crimped into the position. It is recommended to use a line tester to test whether the network cable can communicate at both ends.
♦ Check the crystal head pressure wiring sequence, please use T568B connection method to crimp the crystal head.
D. Can it support 4-core network cable power supply, will it affect camera data transmission?
♦ Our company's POE switch supports 1236 line-sequence power supply, so it is very compatible with 4-core power supply.
♦ The network interface of the camera is a 100M network port. The transmission of the 100M networkis only 1236 quad core, and the other four cores do not play or connect, so it will not afect the camera transmission.
E. When do I need to enable the Extend function?
♦ Extend is a superlong tansmission functin, generally more than 100 meters distance requirement.
♦ The camera signalis disturbed or inuficient in intensity, causing istabilit such as image tasmission and intermittent.
Function Specification:
- All Port: 16 10/100/1000Mbps gigabit POE Ethernet ports,2 gigabit rj45 2 gigabit fiber sfp uplink
- Security: Independent port and function of current protection
- Automatic address learning and address aging
- CableType: 3 types and more than 3 types of twisted pair for 10BaseT(No support for power supply); 5types and more than5 types of twisted pair for 100Base-TX\100Base-TX.
Software specification:
- Auto-MDI/MDI-X detection on each RJ45 port
- Switch Capacity: 9.2G
- Exchange mode: store-and-forward
- Standards compliance: IEEE802.3AF/AT
- MAC address space: 8K
- Supports broadcast storm control
Working Environment:
- Mechanical Dimension : 191mm (L)×141mm(W) ×44mm(H)
- Input Power: AC220-AC240 V / 50-60HZ
- Ambient temperature:
Operating Temperature 0℃ to 40℃ / Storage Temperature -40℃ to 70℃
Specification:
| Product Name | PoE Switch with 16 Ethernet PoE Ports and 2 Gigabit RJ45 Ports |
| Product Model | ONV-POE31016PL |
| Connector | 16x10/100Mbps PoE ports and 2x10/100/1000Mbps auto-sensing RJ45 ports |
| Transfer Mode | Store-And-Forward |
| Network Medium | 10BASE-T: Cat3,4,5 UTP(≤100 meter) |
| 100BASE-TX: 5 classes and more than 5 classes(≤100 meter) | |
| Performance Specifications | Bandwidth: 8.8Gbps (non-blocking) |
| Network Latency (100 to 100M bps): maximum delay less than 20 microseconds | |
| Packet Buffer Memory: 2.75M | |
| Address Database Size: 4K | |
| MTBF: 100,000 hours | |
| Network Protocols and Standards | IEEE 802.3i 10BASE-T |
| IEEE 802.3u 100BASE-TX | |
| IEEE 802.3x Flow Control | |
|
IEEE 802.3 ab 10 0 0BASE-T |
|
| IEEE 802.3af DTE Power via MDI | |
| IEEE 802.3af/at | |
|
IEEE 802.3x |
|
| LEDs Status | System: Power supply |
| Every Port: connecting, PoE working status | |
| Power | Maximum PoE power:240 W |
| Max PoE power for each port:30W | |
| Power input: AC110-220V 50/60Hz; (every country use a custom power plug) | |
| Dimensions/Weight | Dimensions: 295 x 198 x 47 mm, 2.85kg |
| Working Environment | Operating Temperature: -0 ° ~ 40 ° C |
| Storage Temperature: -40 ° ~ 70° C | |
| Humidity: 10% ~ 90%, non-condensing | |
| Storage Humidity: 5% ~ 95%, non-condensing | |
| Working Altitude: 3,000 m (10,000 ft) | |
| Storage Altitude: 3,000 m (10,000 ft) | |
| Radiation | CE mark, commercial |
| FCC Part 15 Class B | |
| VCCI Class B | |
| EN 55022 (CISPR 22), Class B | |
| Safety | CE Mark ,commercial |
| CE/LVD EN60950 | |
| Warranty | 1 year warranty |
