Toilet Tile Grouting Waterproof Floor Wall Tile Ceramic Gaps

Description:

TG-615 is a kind of high quality environment-friendly waterborne powder which

can be mixed with water and used for filling the gap between the ceramic tile or

on another kinds of stones. It is suitable for applying the gap from 3mm to

12mm, our tile grout can make out the best performance in this range.

Where to use:

It is used for all kinds of tiles and stones, both interior building and exterior

building decoration

Advantages:

1. Super bonding power and crack resistance power;

2. Developed mildewproof formula, avoid yellowing and mildew in the damp

environment.

3. Good flexibility, resistant to all kinds of impact;

4. Nontoxic, non-radiant, no irritative odor;

5. More colors can choose, make the surface more beautiful.

Technical Data:

1. Wearability (mm3): <2000

2. Contractibility(%): <3.0

3. Dosage of water absorption in 30 min(g): <5.0

4. Color: grey

5. Packing Size: 25kg/bag(powder)

6. Shelf Life: Powder (airtight): 1 year

Application Instructions:

1. Surface Preparation:

·The surface should be vertical, flat, smooth and free of dust, grease and other

contaminants.

·The tile grout should be used after the application of tile bonding, and wait for

at least 24 hours.

2. Application Method:

·Mix the powder with water at the ratio of 25:5.5-6, and then use electrical

blender to stir evenly.

·Keep the mixture for 5 to 10 minutes, and then stir it again to achieve the best

result.

·Finally apply the grout on the surface and fill the gap with the rubber scraper,

and generally we fill the gap area one square meter at one time. The dosage of

grout must be adequate, to avoid any space in gap.

·After surface is dry(1-2 hours), we could use wet cloth or mop to clean the

surface. The final cleanout should be done after 24 hours.

· Mixing Ratio (powder: water): 25: (5.5-6)

·Application Tool: electrical blender, rubber scraper, horizontal ruler etc.

1. All application tools provided:

Grinding machine, disc for grinding machine, abrasive paper, adhesive tape, mixer,roller, spatula, scraper,shoes,etc.

2. Application video CD and instruction provided

video link : http://www.maydospaint.net/News_993.aspx

3. Applcation support:

We can arrange engineers or professional patiners to go overseas to train your people and guide the application jobs till it is finished, customer pay for the cost.

Q: What should I do to the concrete floor before apply epoxy resin floor paint?

A: Before applying epoxy floor paint, be sure to make the concrete floor smooth and flat, the surface must be clean,sound hard and free from loose particles,oil,grease and other contaminants. If it is old floor with cracks,holes,joints, it is required to repair and till dry.

Glue for Tile ceramic of Swimming Pool/ bathroom tile adhesive

Q: Is there any special requirement on the substrate concrete condition?

A: Yes, The concrete strength must be above >C25 ;

Flatness: the maximum altitude difference of 2M running rule must be <3mm

The moisture content of the base must be <4%.

Q: What is the requirement on the environment during application of epoxy floor paint?

A: 1, The temperature should be no less than 10 C;

2, The moisture of air should be below 85%

3, Make sure the room is well ventilated during application.

Q: What is the mixing ratio with water of tile adhesive TA513?

A: one bag 25 kg of tile adhesive powder generally needs to be mixed with 6~6.5 kg of water.

Q: When can I use the newly pasted tile adhesive?

A: After applying the tiles,you only need to wait for about few hours for walking and use.

Q: How many colors of tile grout do you have?

A: We have tens of colors available as regular colors,also we welcome customized colors for you.

25 kg/bag, 1100 bags maximum in 20ft container (28tons)

Colorful blue Tile Grout material for tile gaps sealer

Waterproof Tile Grout for Gaps of Tile ceramic of Swimming Pool/ bathroom tile adhesive