- Product Details
- {{item.text}}
Quick Details
-
Power Source:
-
None
-
Structure:
-
None
Quick Details
-
Application:
-
Automotive Industry, Washing and Cleaning, wastewater treatment, Water Distribution
-
Pressure:
-
None
-
Place of Origin:
-
Guangdong, China
-
Power Source:
-
None
-
Structure:
-
None
Specification
|
Brand Name
|
DaiSheng
|
|
Product name
|
Oil pipe
|
|
Place of Origin
|
China
|
|
model
|
HW0003740
|
Product Description
If you need cheaper shipping. Please tell us, we will provide solutions for you! Thank you!
Features:
* Frequently used as a hand pump in boats for fuel supply to the out-board engine.
* Fast and Easy handling.
* Works on the vacuum principle.
* For Transfer of Liquids as Gasoline, Diesel, Oil, Water etc.
* Material: PVC, Rubber, Copper
* Quantity: 2 * pipes, 1 *pump
* Pipe length: 1 M
* Pipe inner diameter: approx 7 MM
Note:
* Please allow 0.1-0.3cm differences due to manual measurement, thanks.
* Please understand because of the light irradiation or computer display difference, so I can't guarantee photos and real color
is 100% the same.
Instructions for use:
* The correct way to use the suction pump is to stretch a tube into the liquid you need to pump, and first force it
* Squeeze the flat rubber ball to expel the air, then immediately block the outlet of the tube with your thumb, release the
rubber ball, etc.
* The ball slowly swells and recovers. After the liquid is pumped up to fill the rubber ball, the thumb blocking the outlet is
loosened. Repeated operation 1-2 times will form a continuous self-flow.
* This oil pump needs to rely on the pressure of air to achieve self-flow, because the inner diameter of the pipe is small and
the flow rate is relatively slow.
* Directions are used from top to bottom. When using, keep the position of the rubber ball as low as possible.
* Frequently used as a hand pump in boats for fuel supply to the out-board engine.
* Fast and Easy handling.
* Works on the vacuum principle.
* For Transfer of Liquids as Gasoline, Diesel, Oil, Water etc.
* Material: PVC, Rubber, Copper
* Quantity: 2 * pipes, 1 *pump
* Pipe length: 1 M
* Pipe inner diameter: approx 7 MM
Note:
* Please allow 0.1-0.3cm differences due to manual measurement, thanks.
* Please understand because of the light irradiation or computer display difference, so I can't guarantee photos and real color
is 100% the same.
Instructions for use:
* The correct way to use the suction pump is to stretch a tube into the liquid you need to pump, and first force it
* Squeeze the flat rubber ball to expel the air, then immediately block the outlet of the tube with your thumb, release the
rubber ball, etc.
* The ball slowly swells and recovers. After the liquid is pumped up to fill the rubber ball, the thumb blocking the outlet is
loosened. Repeated operation 1-2 times will form a continuous self-flow.
* This oil pump needs to rely on the pressure of air to achieve self-flow, because the inner diameter of the pipe is small and
the flow rate is relatively slow.
* Directions are used from top to bottom. When using, keep the position of the rubber ball as low as possible.
Hot Searches
