Totally Enclosed Lifeboat Free Fall Lifeboat Diesel Engine Davit simulated launching

Totally Enclosed Lifeboat Free Fall Lifeboat Diesel Engine

The free fall lifeboat is also a fully enclosed lifeboat. Usually stowed on a sloping compartment at the stern. When in use, the safety device securely straps the person to the seat after entering the lifeboat, and then operates the release mechanism. The lifeboat slides on the inclined frame by gravity, falls freely into the water, and then emerges from the water. This type of motor lifeboat is used on cargo ships, tankers, etc., but not on passenger ships.

Require
1) All personnel should be familiar with the operation of all life-saving equipment. It cannot be overemphasized that lifeboat drills should be conducted regularly and carefully. This is especially true when the crew changes frequently.

2) Make sure that the free-fall lifeboat can be launched freely and there are no obstacles on the ramp or under the boat. Make sure the rescue harness is securely stored.

Program
1) Open the boarding door.
2) Get the helmsman on board and start the engine according to the instructions sticker on the helmsman's console.
3) Once the engine is running well, stop the engine and reset it so it restarts immediately after starting.
4) Disconnect the lifeboat from the davit charging plug.
5) The coxswain climbs into the seat and makes sure the steering wheel is in the "0" position.
6) The designated person is now boarding the aircraft through the gate,
take a seat. Each seat is fitted with four-point safety devices. Use the front seat first, try to use the same seat, and adjust the seat belt according to your body size.
7) Close all hatches except the ventilators.
8) Everyone fasten their seat belts.

•Short evacuation times from assembly point to entry into the water;
•A free-fall launch will move the boat to a safe location away from the platform;
•The simulated release system can be used for unmanned launch exercises without free-fall launch;