Without laying a cement layer, it can be directly buried under the adhesive of 8-10mm of ground decoration materials. It is
flexible in laying, easy to install, easy to standardize and operate, and suitable for various ground decoration materials.Whether
it is a concrete floor, a wooden floor, an old ceramic tile floor or a terrazzo floor, it is installed in a ceramic tile adhesive
and has little effect on the elevation of the ground.
- Product Details
- {{item.text}}
Quick Details
-
Application:
-
Hotel
-
Design Style:
-
Modern
-
Place of Origin:
-
ZHE
-
Model Number:
-
QQC-HM-220V-5M
-
Conductor material:
-
Aluminum foil
-
Insulator material:
-
pvc
-
Power:
-
100-300W/M2
-
Surface temperature:
-
65±5℃
-
Customization:
-
yes
-
Maximum voltage:
-
110V/220V
-
Diameter:
-
2.5-4.4(mm)
-
Normal temperature resistance:
-
112Ω
-
Product certification:
-
ISO/CE/EAC
-
Main use:
-
Electric floor heating, snow/ice melting
Quick Details
-
Warranty:
-
More than 5 years
-
After-sale Service:
-
Online technical support, Onsite Installation, Onsite Training
-
Project Solution Capability:
-
3D model design, total solution for projects, Others
-
Application:
-
Hotel
-
Design Style:
-
Modern
-
Place of Origin:
-
ZHE
-
Model Number:
-
QQC-HM-220V-5M
-
Conductor material:
-
Aluminum foil
-
Insulator material:
-
pvc
-
Power:
-
100-300W/M2
-
Surface temperature:
-
65±5℃
-
Customization:
-
yes
-
Maximum voltage:
-
110V/220V
-
Diameter:
-
2.5-4.4(mm)
-
Normal temperature resistance:
-
112Ω
-
Product certification:
-
ISO/CE/EAC
-
Main use:
-
Electric floor heating, snow/ice melting
Products Description
Specification
Double-guide heating cable floor heating mat
|
Product Name
|
Double-guide heating cable floor heating mat
|
|
|
|
|||
|
Product Brand
|
QQC
|
|
|
|
|||
|
Outer sheath
|
polyvinylidene fluoride (FEP)
|
|
|
|
|||
|
Grounding wire
|
copper wire
|
|
|
|
|||
|
Shielding layer
|
aluminum foil + copper wire
|
|
|
|
|||
|
Inner conductor
|
alloy resistance wire + copper wire
|
|
|
|
|||
|
Internal insulation
|
polyvinylidene fluoride (FEP)
|
|
|
|
|||
|
Connector type
|
External connector
|
|
|
|
|||
Application
Installation Instructions
The design should be standardized and scientific, the heat loss calculation should be correct, and the power should not be reducedin order to meet the user's low-cost expectations or the power should be increased in order to make the heating effect obvious.Design power standard requirements: (area: 30cm-50cm thick wall + thermal insulation, 3 meters high, residential buildings forheating purposes) per square meter (heating area) selection design power intensive mean: about 150W/m. Bathroom 180W/m. Thedifference rate between the north and south directions, the adjustment ratio after the comparison of heat transfer betweenhouseholds, and the adjustment of the use of other functional areas are about 5% each.
Why Choose Us
Hot Searches
