- Product Details
- {{item.text}}
Quick Details
-
Appearence:
-
clear
-
Viscosity (25℃ cps):
-
500±500
-
Mixing Ratio:
-
1:1
-
Operating Time(25℃ hr):
-
30-60 mins
-
Curing time (min,25℃):
-
24 hours
-
Fire Resistance:
-
94-V0
Quick Details
-
Place of Origin:
-
Guangdong, China
-
Brand Name:
-
Hong ye Silicone
-
Model Number:
-
HY-9315 HY-9015
-
Appearence:
-
clear
-
Viscosity (25℃ cps):
-
500±500
-
Mixing Ratio:
-
1:1
-
Operating Time(25℃ hr):
-
30-60 mins
-
Curing time (min,25℃):
-
24 hours
-
Fire Resistance:
-
94-V0
Products Description
Description of
UV stabilized
fire proof silicone rubber room temperature cured silicone
Silicone rubber is a liquid sealing material, two parts encapsulating adhesive. This product will not release low molecules in the curing reaction, it's food grade encapsulation material.
Silicone rubber is a liquid sealing material, two parts encapsulating adhesive. This product will not release low molecules in the curing reaction, it's food grade encapsulation material.
Application
HONG YE JIE's silicone gel is mainly used for air filter potting, and can be applied to the surface of PC (poly carbon), PP, ABS, PVC
and other materials and metals (aluminum, iron, copper, zinc).
Silicone gel is also used for encapsulating optical electronics, LCD, and sealing of precision electronic components.
They are also widely used in plane bonding, sealing and repair under high temperature, such as air filter sealing,
high-temperature oven, high-temperature air filter bonding and sealing of induction cooker and other high temperature equipment.
HONG YE JIE's silicone gel is mainly used for air filter potting, and can be applied to the surface of PC (poly carbon), PP, ABS, PVC
and other materials and metals (aluminum, iron, copper, zinc).
Silicone gel is also used for encapsulating optical electronics, LCD, and sealing of precision electronic components.
They are also widely used in plane bonding, sealing and repair under high temperature, such as air filter sealing,
high-temperature oven, high-temperature air filter bonding and sealing of induction cooker and other high temperature equipment.
Advantages
* This product has good adhesion with aluminum, galvanized plate, stainless steel, etc,
* The shrinkage is small and no corrosion. The cured gel has self-adhesive and self healing property, elastic recovery is good
* Excellent weather resistance, corrosion resistance, waterproof, moisture-proof, high temperature and low temperature resistance,
no deformation
* It can absorb the stress produced by thermal expansion and cold contraction without cracking, and has good automatic recovery
sealing effect.
*food grade potting material, good sealing, insulation, shockproof
* This product has good adhesion with aluminum, galvanized plate, stainless steel, etc,
* The shrinkage is small and no corrosion. The cured gel has self-adhesive and self healing property, elastic recovery is good
* Excellent weather resistance, corrosion resistance, waterproof, moisture-proof, high temperature and low temperature resistance,
no deformation
* It can absorb the stress produced by thermal expansion and cold contraction without cracking, and has good automatic recovery
sealing effect.
*food grade potting material, good sealing, insulation, shockproof
Operation
1.Stir part A and part B with right mixing ratio evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer,you
can just pour the mixture slowly from the corner so that less bubbles caused).
2. Enclose the product (the original model) with four plastic plates or wooden plates.
3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
4. Pour the mixture with correct mixing ratio into the model frame.
After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone
mold .
1.Stir part A and part B with right mixing ratio evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer,you
can just pour the mixture slowly from the corner so that less bubbles caused).
2. Enclose the product (the original model) with four plastic plates or wooden plates.
3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
4. Pour the mixture with correct mixing ratio into the model frame.
After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone
mold .
Hot Searches
