- Product Details
- {{item.text}}
Quick Details
-
Series:
-
LED diode
-
Mounting Type:
-
custom installation, custom installation
-
Description:
-
LED diode
-
Place of Origin:
-
China
-
D/C:
-
standard
-
Application:
-
LED diode application
-
Supplier Type:
-
factory
-
Max. Forward Voltage:
-
..
-
Max. Reverse Voltage:
-
., 3-3.3v
-
Max. Forward Current:
-
.
-
Max. Reverse Current:
-
.
-
Diode Type:
-
.
-
Technology:
-
.
-
Voltage - Peak Reverse (Max):
-
.
-
Current - Average Rectified (Io):
-
..
-
Package / Case:
-
standard
-
Diode Configuration:
-
standard
-
Current - Average Rectified (Io) (per Diode):
-
.
-
Speed:
-
.
-
Reverse Recovery Time (trr):
-
.
-
Capacitance @ Vr, F:
-
.
-
Current - Max:
-
.
-
Resistance @ If, F:
-
..
-
Power Dissipation (Max):
-
.
-
Capacitance Ratio:
-
.
-
Capacitance Ratio Condition:
-
.
-
Q @ Vr, F:
-
.
-
Configuration:
-
.
-
Power - Max:
-
standard
-
More discounts:
-
Please contact us
Quick Details
-
Model Number:
-
RGB LED Diodes
-
Brand Name:
-
WAVGAT
-
Operating Temperature:
-
standard
-
Series:
-
LED diode
-
Mounting Type:
-
custom installation, custom installation
-
Description:
-
LED diode
-
Place of Origin:
-
China
-
D/C:
-
standard
-
Application:
-
LED diode application
-
Supplier Type:
-
factory
-
Max. Forward Voltage:
-
..
-
Max. Reverse Voltage:
-
., 3-3.3v
-
Max. Forward Current:
-
.
-
Max. Reverse Current:
-
.
-
Diode Type:
-
.
-
Technology:
-
.
-
Voltage - Peak Reverse (Max):
-
.
-
Current - Average Rectified (Io):
-
..
-
Package / Case:
-
standard
-
Diode Configuration:
-
standard
-
Current - Average Rectified (Io) (per Diode):
-
.
-
Speed:
-
.
-
Reverse Recovery Time (trr):
-
.
-
Capacitance @ Vr, F:
-
.
-
Current - Max:
-
.
-
Resistance @ If, F:
-
..
-
Power Dissipation (Max):
-
.
-
Capacitance Ratio:
-
.
-
Capacitance Ratio Condition:
-
.
-
Q @ Vr, F:
-
.
-
Configuration:
-
.
-
Power - Max:
-
standard
-
More discounts:
-
Please contact us
RGB
LED diode
5mm
common cathode/common anode
Product
Description:
1. Overview: Tricolor Red(R) Green(G) Blue(B) Common Anode(CA), R:620nm-625nm / G:515nm-520nm / B:450nm.455nm,Luminous Intensity(High Brightness): R:2000-3000mcd / G:15000-18000mcd / B:7000-8000mcd 5mmled2. Viewing Angle: 30 Degrees,Parameters : DC 2V-2.2V(R) 3V-3.2V (G/B) Volt 20 mA, Polarity: Anode "+" (Longer Leg)Cathode "." (Shorter Leg), Clear Transparent Round Small Lens3. Package: Pack of 100 Pieces Leddiode(Through Hole DIP 4pins leads mini LEDs Set) Three Colour4. Compatible with: DIY PCB Board Circuit, Arduino, Raspberry Pi, Hobby, Science Experiments, Throwies ProiectBreadboard,T1 T-1 Bulb, Bulk Parts Replacement5. Micro F5 5 mm Diameter, 4pin, Tiny Bright Light,Multi Color with Low Voltage & Low Power Consumption
LED Welding Conditions:
(1) Soldering iron welding: The tip temperature of the soldering iron (up to 30W) shall not exceed 280 ° C: The solderiron must be grounded, and static electricity cannot exceed the range: Welding time shall not exceed 3 seconds; Thwelding position should be at least 3 millimeters away from the colloid.(2) lmmersion welding: The maximum temperature for immersion welding is 260 ° C; The immersion welding timeshall not exceed 3 seconds; The immersion welding position should be at least 3 millimeters away from the colloid.
Pin Forming Method:
(1) lt is necessary to be 2mm away from the colloid to bend the bracket.(2) The forming of the bracket must be completed using clamp or by professional.(3) The forming of the bracket must be completed before welding.(4) The formation of the bracket needs to ensure that the pins and spacing are consistent with those on the circuitboard.
LED Installation Method:
(1) Pay attention to the arrangement of external wires of various devices to prevent incorrect polarity installation.The device should not be too close to the heating element, and the working conditions should not exceed its speciflimits.
(2) Be sure not to install LEDs with deformed pins.(3) When deciding to install in the hole, calculate the size and tolerance of the hole spacing on the surface and circtboard to avoid excessive pressure on the bracket.(4) When installing LEDs, it is recommended to use guide sleeves for positioning.(5) Before the welding temperature returns to normal, must to avoid any vibration or external force on the lED
Cleaning:
1)Special care must be taken when cleaning colloids with chemicals, as some chemicals can damage the surface ofthe colloids and cause discoloration, such as trichloroethylene, acetone, etc. Ethanol can be used to wipe and soakand the time should not exceed 1 minute at room temperature.
Real produ
ct
photos:
Specification
|
item
|
value
|
|
Operating Temperature
|
standard
|
|
Series
|
LED diode
|
|
Mounting Type
|
custom installation
|
|
Description
|
LED diode
|
|
Model Number
|
RGB LED Diodes
|
|
Type
|
LED
|
|
Place of Origin
|
China
|
|
Brand Name
|
WAVGAT
|
|
Application
|
Application Learning Kit for Light Emitting LED Diodes
|
|
Supplier Type
|
factory
|
|
Media Available
|
Other
|
|
Max. Reverse Voltage
|
3-3.3v
|
|
More discounts
|
Please contact us
|
Product packaging
Each product has at least one packaging that belongs to it.
We will provide the most protection for our orders.
Hot Searches
