- Product Details
- {{item.text}}
Quick Details
-
Material:
-
Copper-aluminium transition noses
-
Installation Method:
-
Screw fixing
-
Wire range:
-
10 to 70 Square millimeters
-
Application:
-
Electrical/Cable/Electric equipments
-
Thickened red copper:
-
Strong conductivity
-
Convenient wire pressing:
-
Corrosion Preventive
-
Complete specifications:
-
Durable
-
Package:
-
PE bag
Quick Details
-
Place of Origin:
-
Guangdong, China
-
Brand Name:
-
BENBV
-
Model Number:
-
DTA GTLC GTLA
-
Material:
-
Copper-aluminium transition noses
-
Installation Method:
-
Screw fixing
-
Wire range:
-
10 to 70 Square millimeters
-
Application:
-
Electrical/Cable/Electric equipments
-
Thickened red copper:
-
Strong conductivity
-
Convenient wire pressing:
-
Corrosion Preventive
-
Complete specifications:
-
Durable
-
Package:
-
PE bag
Specification
|
Material
|
Transition line nose cable termination
|
|
Type
|
Screw fixing
|
|
Advantage
|
Good conductivity and oxidation resistance.on stock.Ready to ship
|
|
Wire range
|
10 to 70 square millimetre
|
Model Sheet
For Buyer
Benefits of using wire nose wiring:
1, because the part of the wire nose and wire connection needs to be compacted with crimping pliers, and the part of the pre-equipment connection is pressed with bolts, so it can be very good to ensure that there is enough contact area at both ends of the connection.
2, the use of wire nose wire wiring convenient at the same time, but also can be installed very firmly, there will not be due to the lack of solid and lead to circuit problems.
3, the design of the wire nose in use can ensure that there is enough contact area, reduce the current due to excessive heating caused by accidents, the use of more assured.
Some tips for OT copper nose crimping
1. When crimping the open wire nose, it is necessary to use accurate tools, such as crimping pliers, hydraulic pliers, and electrical tape. Two types of crimping tools are prepared because small specifications require crimping pliers, while large specifications require hydraulic pliers.
2. Peel off the outer skin of the cable and use a tool to remove the insulation layer wrapped around the wire, so that after pressing the wire, it has good conductivity.
3. Cover the open copper nose in the peeled cable, and if there is a gap in the middle, it needs to be plugged with copper wire to ensure tight crimping.
4. Use the same specification of wire pressing tools for pressing. When pressing, it is necessary to ensure that it is tightly pressed to the position where it cannot be moved. After pressing, it is necessary to check whether it is compacted. After compaction, wrap electrical tape around it.
Hot Searches
