paddle valves for gas inflator compressor huizhou cartee garage valve 1/4" switch panel Norgren air suspension pneumatic keys

We will give you a reply within 6 hours after receiving your message.

Small order is also very welcomed, we usually have stock

Contact information:

Mobile:0086-15258178302

WeChat:paul906162793

WhatsApp:0086-18158463117

paddle valves for gas inflator compressor huizhou cartee garage valve 1/4" switch panel Norgren air suspension pneumatic keys

Features:

The manual paddle valve is a simple way of inflating your airbags from an air source. Simply connect an air supply line into
the valve, and a delivery line back out to the airbag.
This Electric version has a built in ON/OFF switch that can turn your compressor relay on at the same time you open the valve to
inflate.
They have 1/4" barb fittings for easy leak free connections
A simple, cheap alternative to electric solenoid valves. Works with air suspension, truck seats, or industrial.
Easy to mount into a dash or steel panel.

Brand new manual paddle valve/switch with electric on/off switch.  The electric on/off is built into the manual paddle valve switch. This will turn your compressor relay on and off when paddle switch is pushed up and down. These can be used for motor cycle suspension as well as for car and truck seats with pneumatic adjustment. The average fill time on bags will be 8 to 12 seconds, depending upon the size of the tank and the max psi in the tank

Functions & Applications:

1,Controls air flow from tank or compressor to suspension bags or pneumatic seats

2,Use 1/4” OD airline(run one from tank or compressor to supply port on the back side of paddle valve and other from delivery port of the paddle valve to bags or seat)

3,Run 2 electric wires to compressor for on/off control.

4,Paddle switch comes with push to snap tabs for easy mounting in a hole on panel(panel not included)

5, A relay may be required to turn compressor on/off

6, Applications included light suspension with manual control, air ride control seats

air suspension solenoid valve VX4

Includes:

· (1) VX4 Corner Solenoid Valve Unit.

· (2) ft Plug-n-Play Weatherproof Harness (for use with e-level™ controller). Splice for use with any other controller or switches.

· (3) Illustrated Manual.

Features:

· For use with e-Level Controller or any other brand of controller or switches.

· Pre-wired & port numbered for reduced installation time.

· High pressure rated for operation up to 200 PSI.

· Dual inlet & exhaust ports for maximum flow.

· Compact layout for minimal space usage (5” x 3” x 3”).

· Anodized aluminum manifold to prevent corrosion.

· 100% weather resistant for harsh under vehicle environments.

Tech Specs:

· Compatible Suspension Type

· Voltage Requirements: 9.5 - 16 volts(Common DC12V)

· Current Requirements: 1.1 amps

· Connectors: IP67 certified

· No. of Inlets Ports: 2

· No. of Exhaust Ports: 2

· Max Operating Pressure: 200 PSI

· Cv Flow Factor: .25

· Average Adjustment Time: ~2.2 seconds

This is Paul,  sales manager is at your service, if you need any further information, please feel free to contact me. My contact information is as follows:

Mobile:0086-15258178302(can receive short message)

WhatsApp:0086-18158463117

WeChat:paul906162793

PS: It is convenient to arrange samples for your quality check.