- Product Details
- {{item.text}}
Quick Details
-
Appearance:
-
GREY/BLACK paste
-
temperature range:
-
-60~260 degree
-
Packing:
-
300 ml/tube
-
Appilcation:
-
Sealing
Quick Details
-
Place of Origin:
-
Guangdong, China
-
Brand Name:
-
Kafuter
-
Model Number:
-
5911
-
Appearance:
-
GREY/BLACK paste
-
temperature range:
-
-60~260 degree
-
Packing:
-
300 ml/tube
-
Appilcation:
-
Sealing
Kafuter K-5911B 300ML Headlight Automotive Silicone Sealant
Characteristics:
1.One-part, neutral, no corrosion,room cure RTV silicon sealant
2.high viscosity, good thixotropy, will not produce any toxic or irritated odor
3.high-temp, pressure and solvent tolerance, low shrinkage, and no collapse.
4.good water and oil proof, impact and vibration resistance.
Application:
1. Seal in big fitting gaps or joints in flange≤6mm
2. Seal in heating terminals, bond themagnetic motor with its shell.
3. Seal in high voltage components or terminal, sensors, transformers, etc.
4. Bond metal, glass, ceramic, semi-conductor components, and plastic, etc.
5. Also, can seal in high temperature oven, steam iron, and industrial pipeline, etc.
Typical Properties:
|
Item |
K-5911 Silicone Sealant |
|
Appearance |
White/Black |
|
Viscosity ( cp ) |
Paste |
|
Density( g/cm 3 ) |
1.2~1.3 |
|
Initial Cure Time ( 25 °C ,min ) |
5 ~1 0 |
|
Tensile Strength ( MPa ) |
1.5 |
|
Elongation ( % ) |
200 |
|
Shear Strength(mpa) |
1.5 |
|
Hardness(Shore A) |
35~45 |
|
Pressure Tolerance(mpa) |
10 |
|
Temperature Range ( °C ) |
-60~260 |
|
Dielectric Strength(kv/mm) |
20 |
|
Permittivity(@60Hz) |
2.8 |
|
Volume Resistivity (Ω.cm) |
1×10 15 |
Directions:
(1) First, clean the surface,and apply the glue with less than 6mm thickness on the bonding surface, then assemble it.
(2) Wait for 5 minutes for initial cure, and 24h full cure.
Attentions:
(1) The cure cndition under damp air, also need more time to cure if the area is large.
(2) Pls tighten and store it well in case of curing inside.
Packing:
300ml/tube, 30 tube/carton
Outer Carton Size: 32X25.5*24.5cm
