Pre-Treatment In order to achieve the best result, it's important that the surface is completely clean and dry . Wash the car surface thoroughly and rinse with water.Use the microfiber cloth to wipe the surface completely dry .
1.Wrap one piece of preofessional ceramic coating white microfiber cloth around the sponge.
2.Shake the bottle, then apply drops onto the cloth until it is covered and saturated in ceramic coating. Make sure to keep applying drops to the cloth to keep it coated, or when the product is not being applied to the surface.
3.Apply a thick layer on the surface. Try to apply in a cross hatch pattern, first horizontally and then vertically. Work panel by panel. On large panels such as the hood try to break into smaller sections.
4.Let the coating sit until you see it “flash” .This is when the coating is starting to dry, and you will see an oily sheen on top of the surface. Depending on heat and humidity this can happen in a minute in high head/humidity areas and as long as 5 in cooler climates.
5.Once you see it start to flash buff the surface with the microfiber towel. The best method is to fold the towel and use one side to do an initial buff of the surface and then flip the cloth to the other side to thoroughly clean the surface of any residue.
6.Continue this process across the entire car one panel at a time.Once the vehicle is fully coated allow at least 1 hour before repeating the process to add layers. We recommend no more than 3 coats. To make your ceramic coating application in one complete effect , do not let your car body touch with water in 3-5 days .
