Alexandrite Laser With Nd Yag Professional Laser Picosecond Pen Blue Red Tattoo q Switch Nd Yag Laser Machine Pigment Removal

(a), working conditions:
1,Ambient temperature: 10~30℃;
2, relative humidity: ≤ 75%;
3, atmospheric pressure: 860 ~ 1060hpa;
4, the use of power: AC220V ± 10%, 50Hz ± 2%;
5, cooling water: using deionized water or pure distilled water, the minimum standard pure water.
(II) basic parameters:
1, geometric size (excluding the joint arm, length × width × height, mm): 90 × 44 × 96 cm;
2, the machine net weight: 68kg; guide light wall 4kg; gross weight 117kg
3, power: 2000W;
4, overcurrent protector model: 220V, 10A
5, working laser wavelength: 1064nm; 755mm; 532nm
6, laser output frequency: 1-10hz;
7, spot diameter: 2-10mm adjustable;
8, single pulse maximum output energy: 1064nm (1064: 0.1 ~ 2.0j); 755mm (0.05 ~ 1.0j); 532nm (0.05 ~ 1.0j);
9, eye hazard distance: NOHD for 100m, in the sealed dense operating room are harmful to the eyes, must wear protective glasses!
10, cooling mode: built-in closed-circuit water-cooled type;

1,Indications
This instrument is mainly used for clinical removal of part of the skin exogenous and endogenous blue, black, brown pigment lesions, such as: tattoo, tattoo eyebrows, freckles, nevus of Ota, etc.
2,Treatment interval
The interval between two treatments should be about two months, so that the broken pigment particles have enough time to be absorbed.
3,Treatment times
The number of treatments for a specific patient depends on the intensity and depth of the pigment, the composition of the pigment and the number of treatments.
The number of treatments for a specific patient is determined by the intensity and depth of the affected pigment, the composition of the pigment, the dose of laser used for each treatment, and the absorption of pigment particles by macrophages in the patient's body. In general, exogenous pigmentation requires more than 3 treatments, and endogenous pigmentation requires more than 5 treatments to obtain more satisfactory results.