concrete precast houses prefab home precast concrete fence mold of plastic EPS hollow core slab sandwich plate machine

What is plastic EPS sandwich panels board

FPB lightweight partition wall panel is also known as FPB lightweight composite sandwich wall panel (calcium silicate board polystyrene particle composite sandwich wall panel): it belongs to a new generation of building partition wall panels with two layers of calcium silicate panels on the surface. It is a solid wallboard compounded with EPS polystyrene particles and various additives in the middle.

Advantage of the plastic EPS sandwich panels board /precast concrete floor slab making machine

A:Light weight
B:Excellent sound insulation
C:Heat Insulation
D:Waterproof Fire proof
E:Energy Efficient Environmental
F:Convenient construction
G:High Intensity without deformation.

EPS concrete lightweight wall panel applications

This kind of polystyrene cement core sandwich wall panel is now dominating the construction industry as the main wall construction materials in almost all aspects of the field, such as: modern shopping mall, office, commercial center, school, hospital, factory, residential building, villa and so on, it can be not only applied to use for small projects, such as private house building, but also widely used to large scale projects, like high rise buildings and modern commercial center.

What type of the panels are you looking for and want to make?

Hongfa supply complete solution of the production line equipment .  board making machinery / concrete wall panels / concrete wall machine /precast concrete wall panel machine /sandwich panel machines/ precast concrete machine /eps panel making machine /precast concrete floor slab making machine

Advantage of the Hongfa plastic EPS sandwich panels board

1. Install fiber cement board and aluminium molds quickly. 2-3 labors can finish 1 set of molding car(30 pcs 100mm thickness panel)within 15mins.
2. 8 hydraulic cylinder guarantee dividers keep tightly when curing. Cement hydration reaction(curing) will expand inside of the machine, so machine's design is important for panels flat surface.
3. Demolding is fast and it will not affect molds installation efficiency.

4. Verified efficiency: 7 labors can get 900sqm per 8 hours.(130sqm/labor/shift)

5. Patent protected product
6. Labor-saving and Advanced Technology
7. Double side opening and higher capacity
8. ISO9001-2015

9.Adopts touch screen control, automatic filling, electronic weighing, temperature control, material level control to realize automatic production.

10. Easy to maintainence, Easy to clean.

Specifications
Production capacity of one  mold cars EPS Cement panel plant as per thickness and size of the panels. Model HFP530A
According to length X width:2440*610mm/2270*610/3000*610mm
Thickness	Pieces/mold car	m2/mold car	Mold car Qty	m2/day	m2/year (300days)
60mm	40	59.5	1	59.5	17,850
75mm	36	53.5	1	53.5	16,050
90mm	32	47.6	1	47.6	14,280
100mm	30	44.6	1	44.6	13,380
120mm	26	38.6	1	38.6	11,580
150mm	22	32.7	1	32.7	9,810
Charging Volume				5m3
finished wall panel dimension				2440*610*60/75/90/100/120/150mm
hydraulic unit motor power				2.2-5.5kw /mold car
Size of machine				3380*3200*2680mm
installed capacity				65-80kw

Other Main Machines for Complete Production Line

1. Mixing plant

HONGFA mixing plant consists of mixer, movable infusion unit and aggregating system. It can mix all raw material automatically and record every data for production. 3.6CBM capacity mixer guarantees infusion efficiency. It only needs about 15seconds to finish a panel with size 2440*610*100mm.

2. EPS Expander

EPS expander is used for expanding raw polysterene, one-time expander can make EPS around 15-18kg/CBM, interval expander can get proportion on 9-11kg/CBM.

3. De-molding machine

De-molding machine can pull the cured panels out deirectly, Hongfa design it based on 6 years panel manufacturing experience, make it possible that demolding machine is movable, after demolding, the molds can be installed immediately without any delay.
Multiwork is possible so efficiency is triple compared to traditional vertical manual and semi horizontal production line.

4. Recycling unit

Recycling unit can save eveything in production, waste slurry settling in underground mixer, the cement and sand will be pumped into mixer again for next mixing cycle. Keep production clean and make waste recycling, cost saving.

5. Hollow core panels unit

If you want hollow core wall panels with thickness above 150mm, HONGFA offers complete system solution. Hollow panels usually use for roof, cladding etc. purpose without any bearing demand.

6. Movable slurry piston pump unit

This unit uses for movable hydraulic slurry infusion, after mixing all raw material in mixer, then slurry pours into this movable
container, it can mix and inject at same time, guarantee slurry not falling down or the heavier material(sand or cement) seperates
from lighter(EPS) one.

We have many succeed production line inside and outside the country of China , Such as ..............

packing and delivery

Guangxi Hongfa Heavy Machinery Group was established in 1990, is one of the largest block making manufacturer and leading supplier of the building block industry in China,as an ISO9001-2000 certificate and "Famous Brand in Guangxi"enterprise and member of China Building Block  Association.

Hongfa Machinery'Honor
1.One of Top Ten Influential Brands in China Brick &Tile Industry
2.China National Enterprice Abiding By Contract & Keeping Good Faith
3.Quality and Credibility of the Dual-protectionb Demonstration Unit
4.High and New Technology Enterprise
5.Famous Trademark of China
6.Star Enterprise with China Patent
7.AAA Grade Credit Enterprise
8.Consumer Satisfaction Unit
9.One of Top 100 building Material Industry Brands of China
10.One of Top Ten Good Faith Units
11.Advanced Exporter in Guangxi Province
12.Advance Quality Management Unit

RFQ

Q: What is the MOQ?
A: 5 sets.According to economic benefit analysis
Q: Can I mix different designs?
A: Sure!
Q: Can I get a lower price if I order large quantities?
A: Yes, cheaper prices with more bigger size orders.
Q: Can I add or delete items from my order if I change my mind?
A: Yes, but you need to tell us asap. If your order has been done in our production line, we cannot change
Q: When you ship my order?
A: Normally 30-45days after receiving your payment, but it can be negotiated based on order qty and production schedule.
Q: How about the quality guarantee period?
A: 5 years.
Q: How can you guarantee the production quality?
A: Our production quality follow China construction machinery standard JGJ33-2012. We have more than 30 years experience on producing the machines and will be inspected by QC team for ach shipment. We have strictly quality control system in our production process. We have 4 times inspection for each finished product before package Third part inspection accepxable.

Please not hesitate to contact us if you are interested in any kinds of products.

Contact Information:
Foreign Trade Dept. :Jiffy
Guangxi Hongfa Heavy Machinery Co.,Ltd.
Wesite:http://www.gxhongfa.cn
precast concrete floor slab making machine
Tel:0086-18260911699 whatsapp
Fax:      0086-771-6036901
Factory add: Linyi city, Shandong province & Nanning city, Guangxi Province, China