- Product Details
- {{item.text}}
Quick Details
-
Brand Name:
-
JC
-
Model Number:
-
318AB
-
Type:
-
Two components
-
Color:
-
Transparent
-
Keywords:
-
Epoxy Resin Liquid
-
Certificate:
-
ROHS,REACH,MSDS
-
Packing:
-
5kg/20kg/200kg
-
Mixing Ratio:
-
A:B=3:1
-
Shelf life:
-
6 Months
-
MOQ:
-
50KG
Quick Details
-
CAS No.:
-
250-68-38-6
-
Other Names:
-
epoxy resin
-
Place of Origin:
-
Guangdong, China
-
Brand Name:
-
JC
-
Model Number:
-
318AB
-
Type:
-
Two components
-
Color:
-
Transparent
-
Keywords:
-
Epoxy Resin Liquid
-
Certificate:
-
ROHS,REACH,MSDS
-
Packing:
-
5kg/20kg/200kg
-
Mixing Ratio:
-
A:B=3:1
-
Shelf life:
-
6 Months
-
MOQ:
-
50KG
factory wholesale price double component crystal clear ab glue transparent yellow resistant casting epoxy resin for crafts
Feature:
Epoxy resin 318AB can be cured under normal temperature and high temperature, with the feature of good flowing property, natural defoaming, anti-yellow, high transparency, no ripple, bright in surface.
Application :
318AB can be widely used for drops of glue, signs, cards, crafts, lighting, photo frame, lamp
potting and mold filling, etc..
Properties before Hardening :
|
Part |
318A |
318B |
|
|
Color |
Transparent |
Transparent |
|
|
Viscosity (25 ℃ mpa·s ) |
2000-4000CPS |
50 MAXCPS |
|
|
Mixing ratio |
A: B = 100:33(weight ratio) |
||
|
Specific gravity |
1.15 |
0.97 |
|
|
Hardening conditions |
25 ℃× 12H to 14H or 55 ℃× 1.5H (2g) |
||
|
Shelf life(25 ℃ , sealed ) |
6 Months |
||
Operation :
1.Weigh A and B glue according to the given weight ratio into the prepared cleaned container, fully mixed the mixture again the container wall by clockwise, place it along for 3 to 5 minutes, and then it can be used.
2.Take the glue according to the usable time and dosage of mixture to avoid wasting. When the temperature is below 15 ℃, please heat A glue to 30 ℃ first and then mix it to the B glue (A glue will be thicken in low temperature ); The glue must be sealed lid after use to avoid rejection caused by moisture absorption.
3.When the relative humidity is higher than 85%, the surface of the cured mixture will absorb moisture in the air, and form a layer of white mist in the surface, so when the relative humidity is higher than 85%, is not suitable for room temperature curing, suggest to use the heat curing.
Properties after Hardening :
|
Hardness shore D |
<86 |
|
ithstand voltage KV/mm |
22 |
|
exural strength Kg/mm2 |
28 |
|
Volume resistivity Ohm3 |
1x10 15 |
|
Surface resistance Ohmm2 |
5X10 15 |
|
Thermal conductivity W/M.K |
1.36 |
|
Induced electric loss 1KHZ |
0.42 |
|
Withstand high temperature℃ |
80 |
|
Moisture absorption% |
<0.15 |
|
Compressive strength Kg/ mm2 |
8.4 |
