- Product Details
- {{item.text}}
Quick Details
-
EINECS No.:
-
Unspecified
-
Place of Origin:
-
Hebei, China
-
Brand Name:
-
LEIMAN
-
Model Number:
-
OEM
-
Type:
-
Neutral
-
Product name:
-
PU adhesive filter glue for air filters
-
Application:
-
Paper
-
Color:
-
White
-
Material:
-
100% Silicone
-
Name:
-
Instant Super Glue
-
Packing:
-
Carton
-
Appearance:
-
White Powder
-
Quality:
-
Top-quality
-
Item:
-
Epoxy Grout
-
Keywords:
-
Hot Melt Adhesive Products
Quick Details
-
CAS No.:
-
9009-54-5
-
Other Names:
-
Hot Melt Adhesive
-
MF:
-
Mixture
-
EINECS No.:
-
Unspecified
-
Place of Origin:
-
Hebei, China
-
Brand Name:
-
LEIMAN
-
Model Number:
-
OEM
-
Type:
-
Neutral
-
Product name:
-
PU adhesive filter glue for air filters
-
Application:
-
Paper
-
Color:
-
White
-
Material:
-
100% Silicone
-
Name:
-
Instant Super Glue
-
Packing:
-
Carton
-
Appearance:
-
White Powder
-
Quality:
-
Top-quality
-
Item:
-
Epoxy Grout
-
Keywords:
-
Hot Melt Adhesive Products
PU adhesive filter glue for air filters
PU adhesive filter glue for air filters
Part A polyurethane system for air filter is composed of hyperactive polyether polyols, cross linking agent, compound catalyst and so on. Part B is modified isocyanate, and it is micro-pore elastomer which adopts cold molding. It has excellent mechanical and anti-fatigue property. Also, with short production cycle, high efficiency and low energy consumption. So, it is widely applied to manufacture air filter cores of cores of cars, ships, construction machinery, generator and other internal combustion machinery’s.
Instructions: 1. Material-A should stirred evenly with plastic hand electric drill, material-B can shake, before used.
2. Open the electrocaloric plate temperature to 40-50 degrees, in winter material-A and material-B with a small container to preheat.
3. Wipe the mould with release agent
4. Each 1kg A add 3-6g water, also according to the local environment, such as the humidity in the air, workshop environment.
5. material-A and material-B are mixed at the mixture ratio of 100:40 ratio, then add 40% talcum powder(heavy calcium powder)(100:40:50±5), with 2800 rev / min motor to mix, mixing time determined by the amount of adhesive, per 100g of adhesive is approximately 7-10 seconds .
6. Pour the Mixed liquid into mould, then put the paper element and give a little pressure on it. 8-15 minutes later you can bring the mould down.
Notes: 1, Keep in airproof, cool and dry place. Inner plunger and outer cover should be tightly covered. Or glue stock will absorb water in air and affect using effects. 2, Material-A or material-B could be used normally in the temperature of 25℃, if the temperature is too high or too low will affect the results. Must use artificial means to cool down or heat up the temperature. 3, Brushing the mould with release agent before pouring the adhesive into the mould, after the release agent dry then pour the adhesive.
Plastic mould
Our other products:
End Cap,Filter Plastic Frame,Plastic Mould,Glue For Filter,Rubber Ring AndFolding Filter Paper Machine,Macking Air Filter Machine,Cutting machine......