Remote type industrial liquid control type digital magnetic inductive sewage flowmeter flow meter

Function

Real-time flow rate, flow velocity, mass flow (when the density is constant), real-time measurement and flow accumulation

Compact Type

IP65

Remote Type

IP65(IP68 optional)

Nominal Diameter

DN10-2000

Flange

In line with GB/T9119-2000 standard carbon steel (Optional stainless steel flanges), other standard flange can be customized

(High pressure can be customized)

DN10 - DN250, PN<1.6MPa

DN300-DN1000, PN<1.0MPa

DN1200-DN2000,PN<0.6MPa

Temperature

-10 – 55℃(-10 – 60℃)

Serial communications

RS-485

Output

Current (4-20 mA) , pulse , frequency , state switch

Maximum measurement error

±0.1℃(Within the measuring range of temperature sensor)

Sensor housing

Carbon steel

Power supply

100-240VAC

Chloroprene rubber (CR),

Water,sewage and slurry,mineral serosity of low abrasion.

Polytetrafluoroethylene (PTFE/F4),

Strong corrosive mediums such as strong acid and alkali

Fluorinated ethylene propylene (FEP/F46),

1.The same as PTFE.
2.Applicable in mediums of low abrasion.

Teflon(PFA)

Applicable in state of load pressure
A pplicable in mineral serosity,slurry and coal slurry of high abrasion.

Molybdenum-containing stainless steel (0Cr18N12Mo2Ti)

Applicable: Domestic/industrial water, sewage, weak acid and alkali saline as well as concentrated nitric acid at room
temperature.

Not Applicable : Hydrofluoric acid, hydrochloric acid, chlorine, bromine, iodine and other media.

Hastelloy B

Applicable: Non-oxidizing acid, such as hydrochloric acid and hydrofluoric acid of certain concentration and other alkali liquor
with a concentration of no less than 70% sodium hydroxide

Not Applicable: Nitric acid and other oxidizing acids

Hastelloy C

Applicable: corrosion by oxidizing acids such as Nitric acid, acid mixtures and sulfuric acid and environmental corrosion by
oxidation resistant salt or that contains other oxidants. For example, Hypochlorite solution higher than room temperature is
strongly corrosion resistant to sea water.

Not Applicable: Reducing acid and chloride such as hydrochloric acid

Ti

Applicable: chloride, hypochlorite, sea water, oxidizing acid. Not applicable: reducing acid such as hydrochloric acid, sulphuric
acid

Ta

Applicable: most acids like concentrated hydrochloric acid, nitric acid and sulfuric acid including hydrochloric acid and nitric
acid at the boiling point as well as sulfuric acid under 175 ℃.

Not applicable: alkali, hydrofluoric acid and smoke sulfuric acid.

Pt

Various acids, bases and salts, excluding aqua regia.