Factory galvanized Brick Wall Reinforcement Mesh / Masonry Wall Reinforcing Ladder Truss Mesh

Introductison of brick force welded wire mesh/coil lath/ladder mesh

Brick Wire Mesh is easy to handle, and when laid embedded in the mortar joining between brickwork or blockwore courses, forms an integral structure of great tcnsilc strcngth which assists in the resistance, vibrations and thermal changes.

Laid on the mortar bed with 25mm clearance to the outside face of the wall and lapped ant least 75mm, if joining lengths. The reinforcement is then embedded completely and for most applications, every third course is suffcient.

Materials of brick force welded wire mesh/coil lath/ladder mesh

Galvanised steel to BSEN 10142-DX51D+Z275 for internal use.
Stainless steel to BSEN 10088-2-1.4301 for external use.

Installation of brick force welded wire mesh/coil lath/ladder mesh

Fix into mortar between brick courses leaving 25mm clearance from face of brickwork. All joints require an overlap of at least 75mm. The mesh can be laid every third brickwork course for most reinforcement.

Applications of brick force welded wire mesh/coil lath/ladder mesh

♦ Concrete slabbing

♦ roads, paving, foundations, marine work

♦ bank strong rooms, partition slabs

♦ concrete block work, asphalt guttering and so on

Specification  of brick force welded wire mesh/coil lath/ladder mesh
Thickness: 0.3-0.6mm
Mesh size: 12x25mm
Roll width: 65mm, 75mm, 100mm, 175mm, 225mm, 300mm etc.
Roll length: 10m, 30m, 50m, 100m etc.
Packing: On cartons or as your requirement.

Pics of brick force welded wire mesh/coil lath/ladder mesh

Pls  tell me if any needs: