IDEC JAPAN 48mm electronic timer relay GE1A 220V ON-Delay switch

IDEC JAPAN 48mm electronic timer relay GE1A 24 V ON-Delay switch
GE1A series of dial timers are simple, yet flexible ON Delay time delay relays.
It is extremely easy to configure the GE1A for a wide variety of set times and is a perfect fit for the large OEM
who wants a simple plug and play timing solution.
The GE1A provides delays up to 10 hours, two different contact configurations
and are designed to meet most application requirements.
With 8 pin octal termination and a variety of accessories, DIN rail,
surface or through-panel mounting is available.
Key Features:
DPDT or SPDT + instantaneous SPDT
8-pin octal base
8 time ranges
Repeat error ±0.2% maximum
Large clear knob for easy setting
Instant monitoring of operational status by LED indicators
Model : GE1A-C30HA220

Voltage Tolerance AC: 85 to 110% ; DC: 90 to 110%
Contact Rating : 240V AC/5A ; 24V DC/5A
Contact Form : Delayed SPDT + Instantaneous SPDT
Repeat Error : ±0.2% ±10msec maximum
Voltage Error : ±0.5% ±10msec maximum
Temperature Error : ±3% maximum
Setting Error : ±10% maximum
Reset Time : 0.1 sec maximum
Insulation Resistance : 100MΩ minimum (500V DC megger)
Dielectric Strength : Between power and output terminals: 2,000V AC, 1 minute
Between contact circuits: 750V AC, 1 minute
Vibration Resistance : Damage limits: Amplitude 0.75mm, 10 to 55 Hz
Operating extremes: Amplitude 0.5mm, 10 to 55 Hz
Shock Resistance : Damage limits: 500m/s2 (Approx. 50G)
Power Consumption : 1.0W
Electrical Life : 100,000 operations minimum (at full rated load)
Mechanical Life : 10,000,000 operations minimum
Operating Temperature : -10 to +55°C (without freezing)
Operating Humidity : 35 to 85% RH (without freezing)
Mode of Operation : ON-Delay
Output : 24V DC/120V AC, 5A ; 240V AC, 5A ;
Time Range : 0.1s - 10h
Panel Cutout : 45.0 (+0.6, -0) x 45.0 (+0.6, -0)
measurement : 48 x48 x 94.2
GE1A-B10HAD24
GE1A-C30HA220 220V timer
GE1A-B10HA220
GE1A-B30HA220
GE1A-C10HA220