CaBLck422 Small Fingerprint Lock Electric Drawer Magnetic Lock for Keypad Cabinet Lock Smart Furniture

Product Description

Pure fingerprint lock instructions

1. When the machine is powered on: the buzzer will sound once

2. In the state where the machine has not entered the fingerprint, it can

be opened as long as the fingerprint is detected. The buzzer sounds

long when the lock is unlocked, and automatically locks after 5

seconds. The buzzer sounds when the lock is turned off.

3.Enter the administrator's fingerprint:

Press and hold the key for one second and the buzzer will sound for a

long time. At this time, the administrator's fingerprint can be entered.

(The administrator's fingerprint is only managed without unlocking

function)

3.1 fingerprint entry success

The finger is placed on the fingerprint collector, and the buzzer sounds

three times and then sounds again, indicating that the fingerprint is

successfully entered.

3.2 Fingerprint entry failed:

Put the finger on the fingerprint collector. If the buzzer sounds twice, it

means that the fingerprint entry failed: exit the line af ter 5 seconds.

4.1 Enter the ordinary user fingerprint:

The administrator's fingeerpints is placed on the fingerprint collector For

1 second. (For the difference of the management fingerpint deletion

Command, the buzer sounds a long beep.

It shows that the ordinary user's finer is placed in the finerprint

collector, and the buzzer sounds three times and then sounds again,

indicating that the fingerprint entry is successful. Can continuously

record more than 19 common user fingers

4.2 Exit the fingerprint status:

sounds once and the reminder has exited

Automatically exit after 5 seconds without any operation, the buzzer

unlocked, if the fingerprint verification does not pass, the buzzer

5. After unlocking, closing, and fingerprinting, when the fingerprint is

unlocked. It is only used to add and delete common user fingerprints.)

sounds twice.

After the fingerprint verification is passed, the buzzer sounds long

and turns on. After 5 seconds,the lock is automatically turned off and

the buzzer sounds once.(The administrator's fingerprint cannot be

unlockd.It is only used to add and delete common user fingerprints.)

6,delete the fingerpint

Delete ordinary user fingerprint:the administrator's fingerprint is

pressed 3 times continuously, and the buzzer sounds 3 times at the

same time.(Press 1 drop, press 2 drop, press 3 drop, press 4 drop to

make a long sound)(press the fingerprint again), wait After 5 seconds,

the normal user fingerprints are all deleted and the buzzer sounds

once and the reminder has exited.



Note: Clear the administrator to press the button 5 times in

succession, there is a beep, indicating that the emptying has been

completed.

When the fingerprint is unlocked, a long beep indicates unlocking, a

short beep indicates locking, and 5 seconds after unlocking is

automatically locked.

"

Product parameters

Unlocking method fingerprint

Authentication mode fingerprint authentication mode

Rejection rate <%2%

Error rate ≤0.001%

Verification time ≤0.5 seconds

Fingerprint capacity 20 groups

Static power consumption <20uA(typ)

Dynamic power consumption <32MA(tyP)

Minimum operating voltage 4.8V

Low voltage alarm 50 times after low voltage alarmPower

DC 1.5V Alkaline Batteries (AA) 4 Capsules

Emergency power supply USB interface

Battery life is about 11 months (average 10 times a day)

Working temperature -25'C-55°C

Working humidity <90%RH

Detailed Images

Packing & Delivery