precast concrete interlock block mould forms for sale

This is our 2017 newest block mold design, use PP (EP200K) as raw material with size of 400 x 200 x 200mm, 300 x 150 x 150mm, it can replace the normal block machine to produce the concrete blocks for your house building, also the final block from this mold is with smooth surface and easy to paint and decorate the indoor and outdoor wall. Most importantly,this block can be 100% interlock together which will save more cement during building and more stable structure for the whole house.

It can be use for a long time and just need a vibrating table and pan concrete mixer then you can do producing, it ’ s a perfect choice for a small and medium-sized factory.

Warranty for this mold can be above 1500 times and above,just need a vibrating table and pan mixer then you can do producing, it's a perfect choice for a small and medium-sized factory.

Features:

Save Power, Save Labor, Higher Quality and Capacity.

1. The interlocking block mold can replace the normal block machine to produce the concrete blocks for your house building,

2. The final block from this mold is with smooth surface and easy to paint and decorate the indoor and outdoor wall.

3. Most importantly, this block can be 100% interlock together which will save more cement during building and and much more efficient to save time to build a house.

Picture
Name	Interlock Plastic Block Mold	Interlock Plastic Block Mold
Model	HTX-400	HTX-200
Size	400x200x200 mm 300x150x150 mm	200x200x200 mm 150x150x150 mm
Material	PP(PE-200K)	PP(PE-200K)
Weight	1.35 kg	0.75 kg
Color	Yellow, Red	Yellow, Red
Warranty	3 years	3 years

Working Tips:

1. Use the 90# gear box oil or mix with used food oil to paint inner the moulds, then use the brush to coat the moulds in order to release the concrete blocks easily.

2. Silver sand: 13mm stone (gravel) cement(400#)=3:2:1, pour the mixed concrete into the interlock moulds, start the vibration table at the same time and keep vibrating until the concrete in the moulds is level and some bubble come out, then send to warehouse (with good ventilation) for 24-36 hours drying.

3. Release the fixed screw and loose the moulds, then move the block out.