QT4-30 diesel engine hydraulic press block moulding machine prices in nigeria

QT4-30 diesel engine hydraulic press block moulding machine prices in nigeria

QT4-30 diesel engine hydraulic press block moulding machine is one of the well sold models of our factory, This machine is very easy in operating. For this machine ,a larger reductor of high quality is equpped, its key rotary parts are changed into bearings, thickened square steel frame is used and wear resisting material is adopted for its inside sleeves for directional positioning for four guiding columns so that the service life of this machine can be largely prolonged.te.

Main technical parameters:

Raw Materials: crushed stone, sand, cement, dust and coal fly ash, cinder, slag, gangue, gravel, perlite, and other industrial wastes.
Applied Products
concrete blocks: solid/hollow/cellular masonry products, paving stones with or without face mix, garden and landscaping products, slabs, edgers, kerbstones, grass blocks, slope blocks, interlocking blocks, etc.
Applied Fields : widely used in buildings, road pavings, squares, gardens, landscaping, city constructions, etc

Main Advantages:

1. Use diesel engine to operation the machine directly, no need any electricity, Very suitable for voltage instability region and often power outage countries!
2. Moving Egg Laying Type, no need pallets, can produce the bricks to the floor.
3. Easy opeartion, use diesel engine, only use 2-3 person can make production!
4.Save work area,only need 300-500square meters.

Production capacity :

	Block	Size/mm	Moulding Cycle	Qty/Mould	Qty/Hour	Qty/8Hours
Hollow Block		400x200x200	30s	4pcs	400pcs	3200pcs
Hollow Block		400x150x200	3 0 s	5pcs	500pcs	4000pcs
Hollow Block		400x100x200	3 0 s	7pcs	700pcs	5600pcs
Poroue Block		240x115x90	3 0 s	9pcs	720 pcs	5760pcs
Solid Block		240x115x53	3 0 s	21pcs	1800pcs	15000pcs
Paver		225x112.5x60	3 0 s	9pcs	850pcs	7000pcs

QT4-30 diesel engine hydraulic press block moulding machine prices in nigeria

Raw materials :

Raw materials are generally cement, sand, gravels, crushed stone powder, slags, fly ash, ect, depending on customers' choice.

A. 8-10% cement, 30-40% sand, 50-60% crushed stone

B. 8-10% cement, 30% flyash, 60% sand or stone powder The diameter of sand and stones need to be less than 15mm, if produce paver interlocking brick, need color iron.

QT4-30 diesel engine hydraulic press block moulding machine prices in nigeria

Customer Site:

Packing shall be wrapped with plastic film or according to the customer's require.

1. Wrap the whole brick machine with plastic film before shipment to prevent water or moisture,

2. Then load the brick machine into the container with a forklift,

3. During loading, tighten the machine with the reinforcing ring in the container to avoid damage caused by transportation bumps on the brick machine.