- Product Details
- {{item.text}}
Quick Details
-
EINECS No.:
-
210-898-8
-
Place of Origin:
-
Shandong,China
-
Brand Name:
-
ZHONGLIAN
-
Model Number:
-
epoxy resin
-
Type:
-
Liquid
-
Product name:
-
adhesive deep pours transparent liquid resine-epoxy-
-
Name:
-
epoxy resin and hardener
-
Keywords:
-
Epoxy Resin Liquid
-
Colors:
-
Transparent White
-
Viscosity:
-
Excellent Viscosity
-
Application:
-
Table Tops
-
Mixing Ratio:
-
A:B=3:1
-
Advantage:
-
100% Waterproof
-
Packing:
-
Carton
Quick Details
-
CAS No.:
-
7085-85-0
-
Other Names:
-
AB Glue
-
MF:
-
C6H7NO2
-
EINECS No.:
-
210-898-8
-
Place of Origin:
-
Shandong,China
-
Brand Name:
-
ZHONGLIAN
-
Model Number:
-
epoxy resin
-
Type:
-
Liquid
-
Product name:
-
adhesive deep pours transparent liquid resine-epoxy-
-
Name:
-
epoxy resin and hardener
-
Keywords:
-
Epoxy Resin Liquid
-
Colors:
-
Transparent White
-
Viscosity:
-
Excellent Viscosity
-
Application:
-
Table Tops
-
Mixing Ratio:
-
A:B=3:1
-
Advantage:
-
100% Waterproof
-
Packing:
-
Carton
transparent epoxy resin double components adhesive
deep pours liquid resin epoxy
| Specification | Epoxy Resin | HL-A | Standard |
| Appearance | Colorless Transparent Liquid | -------- | |
| Viscosity(mPa.s25℃) | 500-1000 | GB/T 22314-2008 | |
| Specific Gravity 25℃ | 1.05 | GB/T4612-2008 | |
| Hardener | HL-B | Standard | |
| Appearance | Colorless Transparent Liquid | -------- | |
| Viscosity(mPa.s 25℃) | 100 | GB/T 22314-2008 | |
| Specific Gravity 25℃ | 0.96 | GB/T4612-2008 | |
| Note:(1)Typical performance should not be considered as product specifications | |||
| Mixing and Processing | The resin system shall be mixed in the following proportions | |
| HL-A Epoxy Resin | HL-B Hardener | |
| 100 | 33 | |
| Processing time 25℃ | 40-60min | |
| Cure Condition | 25℃/8-10hours/60°℃2-4hours | |
| Hardness | shore D | <85 |
| Voltage resistance | KV/mm | 22 |
| Bending strength | Kg/mm2 | 23 |
| Volume resistance | Ohm3 | 1x10 15 |
| Surface resistance | Ohmm2 | 5X10 15 |
| Thermal conductivity | W/M.K | 0.61 |
| Inductive loss | 1KHZ | 0.42 |
| High heat resistance temperature | ºC | 80 |
| Water absorption | % | <0.15 |
| compressive strength | Kg/mm2 | 13.4 |
Note:
1.Accurate proportion and thoroughly uniform mixing are the key to achieve the best performance of the resin system. Be sure to mix the materials which is on the container sides, bottom and corners thoroughly. After stop stirring, let stand for 3-5 minutes before using (Remove bubbles by vacuuming when using).
2.lf the temperature is lower than 15℃, preheat epoxy resin HL-A before mixing.
3.Under the condition of relative humidity greater than 85%, it is not suitable for room temperature curing, and heating curing is recommended.
It is widely used for wood crafts wood casting, river table , glass painting, ceramic tile jointing etc.
