- Product Details
- {{item.text}}
Quick Details
-
Model Number:
-
TMAX- EQ-VGB-1
-
Color:
-
Request
-
Working gases:
-
Atmospheric Gases, N2, Argon
-
Gloves:
-
One pair of Gloves are included for immediate use
-
Transparent Front Panel:
-
nel: Front Panel made of transparent plastic
-
Glove Box Chamber Dimensions:
-
1186mm(L) x 480mm(W) x 490mm(H)
-
Vacuum gauge and valves:
-
One KF-25 connector is installed
-
Input Power:
-
1500W
-
Working Voltage:
-
AC 110 - 240 V 50/60 Hz
Quick Details
-
Power:
-
Electronic
-
Place of Origin:
-
China
-
Brand Name:
-
TMAX
-
Model Number:
-
TMAX- EQ-VGB-1
-
Color:
-
Request
-
Working gases:
-
Atmospheric Gases, N2, Argon
-
Gloves:
-
One pair of Gloves are included for immediate use
-
Transparent Front Panel:
-
nel: Front Panel made of transparent plastic
-
Glove Box Chamber Dimensions:
-
1186mm(L) x 480mm(W) x 490mm(H)
-
Vacuum gauge and valves:
-
One KF-25 connector is installed
-
Input Power:
-
1500W
-
Working Voltage:
-
AC 110 - 240 V 50/60 Hz
Benchtop Airlock Anaerobic Chamber Stainless Steel Vacuum Organic Isolator Glove Box Price
EQ-VGB-1 is a small size stainless steel glove box with Airlock Chamber, Gauges and vacuum Flanges, which allow glove box operate under vacuum to remove moisture and oxygen without expensive inert gas purging, It is an ideal tool for material and chemical researchers to process air sensitive materials and solutions.
|
Glove Box Chamber
|
·Case Material: Made of 11 gauge (3mm thickness) 304 stainless steel sheet with sport frame, which provide heavy duty structure for vacuum ·Dimensions: 555mm(L) x 444mm(W) x 414mm(H) ·Max. Positive Pressure: 810 Torr (1.1 atm) oNote: Gloves cannot work if pressure is higher than 810 Torr ·Max. Vacuum Level: 0.5 Torr oNote: Stainless Steel case may deform at higher vacuum level oLeakage Rate in GloveBox: < 6 Torr/hour |
|
Air-lock Chamber |
·Dimensions: 200mm(ID) x 270mm(L) ·Max. Vacuum Level: 0.05 Torr |
|
Vacuum gauge and valves |
·Two vacuum flanges are included for glove box to achieve vacuum to remove moisture and oxygen without expensive inert gas purging oDo not operate under vacuum.Vacuum is used for purging the chamber before operation. ·One KF-25 connector is installed in the back for connecting humidity monitor or other testing equipment |
|
Power Extension |
·One extension socket (Max power 1500W) is installed in the glove box main chamber. ·Note: 110V power cord was included for immediate use. (For 208~240V power supply, no plug will be included) |
|
Gloves |
·One pair of Gloves are included for immediate use ·Optional: You may order 6'' gloves here because they have: oIncreased stretching, bending ability and tear strength oHigh effectiveness when vaporized hydrogen peroxide (VHP) is present oHigh resistance to aromatics, hydrocarbons, solvents, fats, and acids oResistozone oHigh static dissipative qualities |
|
Vacuum pump and fittings (Optional) |
Vacuum pump and fittings are not included.
|
|
Product Dimensions |
1186mm(L) x 480mm(W) x 490mm(H) |
|
Warranty |
Two years limited warranty with lifetime support |
|
Application Notes |
Corrosive liquid (such as LiPF6 electrolyte) must be remain sealed in a container inside the glove box. Otherwise, liquid vapour may condense and corrode the steel chamber and purification pipeline. ·The H2O & O2 removing rate is largely dependent on the type of purging gas used. For faster chamber purging process, Nitrogen is preferred over Argon due to its lighter mass. ·By closing the vacuum flange, the glove box can be vacuumed by mechanical pump upto 0.5 torr before filling inert gas, (moisture can be below 180 ppm and oxygen below 200 ppm). Then you can save at least 1-2 tank of inert gas from purging at each operation. |
|
Shipping Dimensions |
48"x40"x32" |
|
Shipping Weight |
320 lbs |
