- Product Details
- {{item.text}}
Quick Details
-
Capacity:
-
500000
-
Place of Origin:
-
Zhejiang, China
-
Brand Name:
-
RONGPENG
-
Model Number:
-
RHF9021NS
-
Item:
-
Pneumatic Air Tools Framing Nailer
-
Weight:
-
3.96kg(7.93lbs)
-
Operating Pressure:
-
80-120psi
-
Max.Pressure:
-
120psi
-
Load Capacity:
-
120pcs
-
Nails:
-
2-Inch to 3-1/2-Inch Coil Roofing Nails
-
Application:
-
Exterior drywall, Vinyl siding, Insulation board
-
Feature:
-
Selective actuation switch, Tool-free precise adjustable drive depth
-
Quality:
-
High Industrial Qulity
-
Usage:
-
Furniture Assembling
Quick Details
-
Warranty:
-
1 year limited
-
Voltage:
-
70-120psi
-
Type:
-
Coil Nail Gun
-
Capacity:
-
500000
-
Place of Origin:
-
Zhejiang, China
-
Brand Name:
-
RONGPENG
-
Model Number:
-
RHF9021NS
-
Item:
-
Pneumatic Air Tools Framing Nailer
-
Weight:
-
3.96kg(7.93lbs)
-
Operating Pressure:
-
80-120psi
-
Max.Pressure:
-
120psi
-
Load Capacity:
-
120pcs
-
Nails:
-
2-Inch to 3-1/2-Inch Coil Roofing Nails
-
Application:
-
Exterior drywall, Vinyl siding, Insulation board
-
Feature:
-
Selective actuation switch, Tool-free precise adjustable drive depth
-
Quality:
-
High Industrial Qulity
-
Usage:
-
Furniture Assembling
RongPeng Professional Air Nailer Framing Nailer
FEATURES:
• One piece drive pin working life is more 0.3 millions times.
• High strength alum alloy die casting body.
• Nail head and drive pin have be heat treated by Ipsen which import from Germany.
APPLICATIONS:
Framing,sheathing,siding,trusses,bridging,wood to
masonry,engineered lumber,strapping,fencing,and
exterior decks,subflooring,bracing
Technical Parameters :
Model No:RHF9021NS
Dimension:530×350×108mm(20.86"×13.78"×4.25")
Weight:3.96kg(7.93Ib)
Operating Pressure:80-120psi(5.5-8bar)
Max.pressure Max.pressurez :120psi(8.3bar)
Load Capacity:2×30pcs
| Model No | Dimension | Weight | Operating Pressure | Max.pressure |
| RHF9021NS | 530×350×108mm(20.86"×13.78"×4.25") | 3.96kg(7.93Ib) | 80-120psi(5.5-8bar) | 120psi(8.3bar) |
Air Nailer Trouble Shooting:
| Symptom | Problem | Solutions |
| Air nailer's leak near top of tool or in trigger area |
1.O-ring in trigger valve are damage 2. Air nailer's trigger valve head are damage 3.Air nailer's trigger valve stem, seal or O-ring are damaged |
1.Check and replace O-ring 2.Check and replace 3.Check and replace trigger valve stem, seal or O-ring |
| Air Nailer's leak near bottom of tool |
1.Loose screws 2.Worn or damaged O-ring or bumper |
1.Tighten screws 2.Check and replace O-ring bumper |
| Air leak between body and cylinder cap |
1.Loose screws 2.Worn or damaged O-ring or bumper |
1.Replace bumper 2.Adjust the air pressure |
| Blade driving fastener too deep |
1.Worn bumper 2.Air nailer pressure is too high |
1.Verify adequate air supply 2.Place 2 or 6 drops of oil into inlet 3.Check and replace O-ring or seal 4.Replace damaged air nailer internl parts |
| Air nailer does not operate well: can not drive fastener or operate slugishly |
1.Inadequate air supply 2.Inadequate lubrication 3.Worn or damaged air nailer's O-ring or seals 4.Exhaust port in cylinder head is blocked |
1.Verify adequate air supply 2.Place 2 or 6 drops of oil into air nailer's inlet 3.Check and replace O-ring or seal 4.Replace damaged internl parts |
| Tool skips fasteners |
1.Worn bumper or damaged spring 2.Dirt in front plate of the air nailer 3.Dirt or damage prevent fasteners from moveing freely in spray gun's magazine 4.Worn or dry air nailer's O-ring on piston or lack of lubrication 5.Cylinder cover air nailer's seal leaking
|
1.Repalce bumper or pusher spring 2.Clean drive channel on front plate 3.Air nailer's magazine needs to be cleaned 4.O-ring need to be replaced and lubricate 5.Replace sealing washer |
| Tool jams |
1.Incorrect or damaged fasteners 2.Damaged or worm driver guide 3.Air nailer's magazine or nose screw loose 4.Air nailer's magazine is dirty |
1.Change and use correct fastener 2.Check and replace the driver 3.Tighten the magazine 4.Clean the magazine |
Customer Questions & Answers:
Q1: What's your MOQ?
A: Our MOQ is 100 units per model for RONGPENG brand.
Q2: What's your payment terms?
A: We could accept L/C, T/T and Credit card, also accept the payment against B/L copy after discuss detailed.
Q 3: What is the lead time?
A: Sample: 7days, mass production 20-40 days for the first order.
Q 4: Can we put our logo on our products? Is there extra charge for it?
A: Yes, we accept the OEM brand and the different logo way on the housing, stickers are without extra charge,
mould and laser engraving with different cost and we can discuss detailed.
Q 5: Can samples be delivered free charge?
A: For quality reference, we can supply FOC 1-2 samples, but Freight Collect please.
Q6: How about your company scale?
A: our company is with 1400 employee and covers 100,000 square meters, more than 120 engineers and 100QC
for quality control and improvement.
