- Product Details
- {{item.text}}
Quick Details
-
Model Number:
-
DN15-DN100
-
Product name:
-
PVDF safety valve
-
Body material:
-
PVDF
-
Connection:
-
Hot-melt
-
Size:
-
1/2''--4''
-
Standard:
-
DIN
-
MOQ:
-
1 Piece
-
Color:
-
White
-
Working pressure:
-
1.0Mpa
-
Working Temperature:
-
-20 - +120
-
Seal Material:
-
NBR EPDM FPM
Quick Details
-
Port Size:
-
1/2"-4"
-
Warranty:
-
1years
-
Place of Origin:
-
Guangdong, China
-
Model Number:
-
DN15-DN100
-
Product name:
-
PVDF safety valve
-
Body material:
-
PVDF
-
Connection:
-
Hot-melt
-
Size:
-
1/2''--4''
-
Standard:
-
DIN
-
MOQ:
-
1 Piece
-
Color:
-
White
-
Working pressure:
-
1.0Mpa
-
Working Temperature:
-
-20 - +120
-
Seal Material:
-
NBR EPDM FPM
Overview of safety valve/back pressure valve product Safety valve membrane and valve element are pressed against the valve seat by internal spring. When the pressure in the system pipeline exceeds the preset pressure, the membrane and valve element are jacked up, and the medium is discharged from the flow pipe and container. On site, the pressure can be set within the range of 0-10Mpa through the adjusting screw with the help of the pressure gauge in the pipeline. The relief pressure is generally set 0.1-02Mpa higher than the system pressure. The pressure adjustment of the safety valve is not allowed to exceed the maximum pressure of the pump, The installation shall be as close to the outlet of the pump as possible, and there shall be no valve between the pump and the safety valve. The back pressure valve for protecting the safety of the pump and the normal operation of the system shall be installed on the positive pressure discharge pipeline of the metering pump or diaphragm pump to prevent siphon, eliminate the change of the dosage due to the pressure fluctuation at the dosing point, so as to ensure the dosing accuracy of the pump. Remove the protective screw on the adjusting screw on the site, and rotate the adjusting screw, The pressure can be adjusted to the required pressure with the help of the pressure gauge in the pipeline, and the back pressure can be set within the range of 0o6Mpa through the adjusting screw. Cooperate with pulse damper to reduce the damage of water hammer to the system, maintain a certain constant pressure from the pump outlet to the back pressure valve, and maintain a constant flow rate of the system. Release the pipeline pressure, and ensure the stability of the system pressure. Protect the safety of the pump and the normal operation of the system. Cooperate with pulse damper to reduce the damage of water hammer to the system, and achieve superior low vibration regulation effect. Reduce the peak value of flow fluctuation, Protect the pipeline system from the impact of pressure fluctuation The diaphragm adopts the advanced PTFE+rubber composite process, which is applicable to almost all corrosive fluids, with reliable sealing and no leakage.