- Product Details
- {{item.text}}
Quick Details
-
MF:
-
-
-
EINECS No.:
-
-
-
Place of Origin:
-
Jiangsu, China
-
Type:
-
Water Treatment Chemical
-
Brand Name:
-
RealFine
-
Model Number:
-
RF-ZLJ-03
-
Product Name:
-
Waterproofing Agent RF-ZLJ-01
-
Appearance:
-
cationic white emulsion
-
pH:
-
5.5-6
-
Solids content:
-
28-32%
-
Safety:
-
Harmless No-Flammable
-
Advantage:
-
Faster sedimentation, better flocculation
-
HS Code:
-
3809910000
Quick Details
-
CAS No.:
-
-
-
Purity:
-
98%
-
Other Names:
-
Waterproofing agent
-
MF:
-
-
-
EINECS No.:
-
-
-
Place of Origin:
-
Jiangsu, China
-
Type:
-
Water Treatment Chemical
-
Brand Name:
-
RealFine
-
Model Number:
-
RF-ZLJ-03
-
Product Name:
-
Waterproofing Agent RF-ZLJ-01
-
Appearance:
-
cationic white emulsion
-
pH:
-
5.5-6
-
Solids content:
-
28-32%
-
Safety:
-
Harmless No-Flammable
-
Advantage:
-
Faster sedimentation, better flocculation
-
HS Code:
-
3809910000
Waterproofing agent
RF-ZLJ-03
Describe：
Product components: C8 fluorocarbon ester polymer
Properties:
The finished fabric has outstanding water-repellent, oil-repellent and anti-fouling properties, is resistant to high waterproof pressure, and has high air permeability. Under appropriate process and dosage, it can achieve 100 points of waterproof and 8 levels of oil-proof. It has good compatibility and can be used in the same bath with anionic additives. Adding softeners and antistatic agents has little effect on performance. Non-stick roller, does not affect the original color of the fabric, has a good hand feel, and maintains the original breathability of the fabric.
Does not contain solvents, does not contain APEO, has no ignition point, and is safer to use.
|
Customzied!(√)
Free Sample!(√)
Chemical Leader!(√)
|
|
|
|
Product name
|
Waterproofing agent RF-ZLJ-01
|
|
|
Appearance
|
cationic white emulsion
|
|
|
PH value
|
5.5-6
|
|
|
Solids content
|
28-32%
|
|
|
Solubility
|
easily soluble in water
|
|
|
Note
:
Our product can be made upon your special request!
|
|
|
Application:
RF-ZLJ-03 can be used alone or with other finishing liquids. Note that the finishing liquid must be adjusted to pH 4-6 with acetic acid to be acidic before adding RF-ZLJ-03. The fabric to be finished must be thoroughly pretreated first, and there is no surfactant residue.
Application area: used for waterproof, oil-proof and anti-fouling treatment of various fibers and their blended fabrics.
Dosage:
RF-ZLJ-03: 10-50 g/L
The product is first pre-dissolved in cold water and then added to the acidic finishing liquid
Wipe rate 70-100%
Drying at 100℃
Baking 160℃-170℃, 1.5 minutes
Penetration Problems:
If the fabric has poor penetration, we recommend adding 10-20g/L of commercially available conventional penetrant to the finishing liquid to ensure uniform squeeze. The penetrant should be added to the solution first.
Storage:
Storage: This product is sensitive to extreme cold and heat. Do not store it below 0℃ or above 40℃, otherwise it may undergo irreversible quality changes.
Note: This manual is only for reference. The effects may vary depending on the process used in the specific factory. Pre-testing should be done before use. In order to ensure product quality, be sure to cover the barrel lid after each use.
Hot Searches
