- Product Details
- {{item.text}}
Quick Details
-
EINECS No.:
-
25852-47-5
-
Place of Origin:
-
Guangdong, China
-
Brand Name:
-
Kafuter
-
Model Number:
-
K-0271-50g
-
Type:
-
Anaerobic adhesive
-
Chemical composition of base material:
-
Methacrylate
-
appearance:
-
Red viscous liquid
-
Viscosity (MPa. S):
-
300~800
-
proportion:
-
1.05
-
Flash point (℃):
-
>108
-
Maximum filling gap (mm):
-
0.13
-
Curing time at room temperature (min):
-
≤20
-
Full solid time at room temperature (HR):
-
24
-
Failure moment:
-
≥20
-
Average disassembly torque:
-
≥20
Quick Details
-
CAS No.:
-
25087-26-7
-
Other Names:
-
Anaerobic adhesive
-
MF:
-
(C4H6O2)x
-
EINECS No.:
-
25852-47-5
-
Place of Origin:
-
Guangdong, China
-
Brand Name:
-
Kafuter
-
Model Number:
-
K-0271-50g
-
Type:
-
Anaerobic adhesive
-
Chemical composition of base material:
-
Methacrylate
-
appearance:
-
Red viscous liquid
-
Viscosity (MPa. S):
-
300~800
-
proportion:
-
1.05
-
Flash point (℃):
-
>108
-
Maximum filling gap (mm):
-
0.13
-
Curing time at room temperature (min):
-
≤20
-
Full solid time at room temperature (HR):
-
24
-
Failure moment:
-
≥20
-
Average disassembly torque:
-
≥20
Product Description
Product application:
Avoid loosening and leakage of threaded fasteners.It is used for permanent locking and sealing of
threaded fasteners below M36 to prevent thread corrosion.
Typical application: stud screw in end locking (such as cylinder head stud).
Avoid loosening and leakage of threaded fasteners.It is used for permanent locking and sealing of
threaded fasteners below M36 to prevent thread corrosion.
Typical application: stud screw in end locking (such as cylinder head stud).
Instructions：
① The coated surface shall be clean, dry and free from grease.
② Apply enough glue to the bolt to fill all the engagement threads. The thin glue layer below 0.05 mm works best.
③ For oversize thread, the gap will affect the curing speed and strength of the product.This product will reduce the friction
force (torque tension ratio) produced by assembly.In applications where the threads need to be tightened to a critical value, this ratio should be determined in advance.
① The coated surface shall be clean, dry and free from grease.
② Apply enough glue to the bolt to fill all the engagement threads. The thin glue layer below 0.05 mm works best.
③ For oversize thread, the gap will affect the curing speed and strength of the product.This product will reduce the friction
force (torque tension ratio) produced by assembly.In applications where the threads need to be tightened to a critical value, this ratio should be determined in advance.
Precautions for use:
This product is not suitable for use on plastic parts; in order to avoid polluting the original glue, please do not return the poured glue to the original package.
This product is not suitable for use on plastic parts; in order to avoid polluting the original glue, please do not return the poured glue to the original package.
Applied Range
thixotropic viscosity
Ideal for low-strength threadlocking of adjusting screws, countersunk head screws and set screws
Permits disassembly with hand tools
For M2~M12 thread locking and sealing ,Especially suited to small thread sizes
Prevents loosening on vibrating assemblies, (e.g. pumps, gear boxes or presses)
Applied to the diameter of not more than 1/4'' fastening things best, with a certain degree of lubricity to achieve a precise
load clamp.
Ideal for low-strength threadlocking of adjusting screws, countersunk head screws and set screws
Permits disassembly with hand tools
For M2~M12 thread locking and sealing ,Especially suited to small thread sizes
Prevents loosening on vibrating assemblies, (e.g. pumps, gear boxes or presses)
Applied to the diameter of not more than 1/4'' fastening things best, with a certain degree of lubricity to achieve a precise
load clamp.
Hot Products
About Us
Logistic Transport
FAQ
Q: Can I buy samples placing orders?
A: Yes.Please feel free to contact us. The sample is free, you only need to pay the shipping cost.
Q: Can you provide OEM service?
A: Yes, we can produce under your own brand name. Logo and packing design need to be provided so as to make customized brand name.
Q: What is your payment term?
A: T/T, Western Union, L/C and Paypal. This is negotiable.
Q: What is the shipping method?
A: It could be shipped by sea, by air or by express(EMS, UPS, DHL, TNT, FEDEX and ect).Please confirm with us before placing orders.
Q: What other products do you have?
A: In addition to our main products are UV glue and silicone sealant, epoxy resin AB glue, we also have many other products, such as acrylic acid AB glue, anaerobic glue, instant dry glue, Ms glue, polyurethane glue and other thousands of high-performance adhesives.
Hot Searches
